RAID: High-Performance, Reliable Secondary Storage
Peter M. Chen
Computer Science and Engineering Division
Department of Electrical Engineering and Computer Science
1301 Beal Avenue
University of Michigan
Ann Arbor, MI 48109-2122
Edward K. Lee
DEC Systems Research Center
130 Lytton Avenue
Palo Alto, CA 94301-1044
Garth A. Gibson
School of Computer Science
Carnegie Mellon University
5000 Forbes Avenue
Pittsburgh, PA 15213-3891
Randy H. Katz
Computer Science Division
Department of Electrical Engineering and Computer Science
571 Evans Hall
University of California
Berkeley, CA 94720
David A. Patterson
Computer Science Division
Department of Electrical Engineering and Computer Science
571 Evans Hall
University of California
Berkeley, CA 94720
Abstract: Disk arrays were proposed in the 1980s as a way to use parallelism between
multiple disks to improve aggregate I/O performance. Today they appear in the product
lines of most major computer manufacturers. This paper gives a comprehensive overview
of disk arrays and provides a framework in which to organize current and
future work. The paper first introduces disk technology and reviews the driving forces
that have popularized disk arrays: performance and reliability. It then discusses the two
architectural techniques used in disk arrays: striping across multiple disks to improve performance
and redundancy to improve reliability. Next, the paper describes seven disk
array architectures, called RAID (Redundant Arrays of Inexpensive Disks) levels 0-6 and
compares their performance, cost, and reliability. It goes on to discuss advanced research
and implementation topics such as refining the basic RAID levels to improve performance
and designing algorithms to maintain data consistency. Last, the paper describes six disk
array prototypes or products and discusses future opportunities for research. The paper
includes an annotated bibliography of disk array-related literature.
Content indicators: (Computing Reviews Classification) B.4.2 and B.4.5 [Input/Output
and Data Communications]: Input/Output Devices; Reliability, Testing, and Fault-Tolerance;
D.4.2 [Operating Systems]: Storage Management; E.4 [Coding and Information
Theory]. Other keywords: disk array, RAID, parallel I/O, storage, striping, redundancy
ACM Computing Surveys
Chen, Lee, Gibson, Katz, Patterson RAID: High-Performance, Reliable Secondary Storage i
1 INTRODUCTION ...................................................................................................1
2 BACKGROUND .....................................................................................................3
2.1 Disk Terminology ................................................................................................................3
2.2 Data Paths ............................................................................................................................5
2.3 Technology Trends...............................................................................................................7
3 DISK ARRAY BASICS...........................................................................................8
3.1 Data Striping and Redundancy ............................................................................................8
3.2 Basic RAID Organizations ................................................................................................10
3.2.1 Non-Redundant (RAID Level 0).........................................................................10
3.2.2 Mirrored (RAID Level 1) ....................................................................................10
3.2.3 Memory-Style ECC (RAID Level 2) ..................................................................12
3.2.4 Bit-Interleaved Parity (RAID Level 3)................................................................12
3.2.5 Block-Interleaved Parity (RAID Level 4) ...........................................................13
3.2.6 Block-Interleaved Distributed-Parity (RAID Level 5)........................................13
3.2.7 P+Q Redundancy (RAID Level 6) ......................................................................14
3.3 Performance and Cost Comparisons..................................................................................15
3.3.1 Ground Rules and Observations..........................................................................15
3.4.1 Basic Reliability ..................................................................................................19
3.4.2 System Crashes and Parity Inconsistency ...........................................................21
3.4.3 Uncorrectable Bit-Errors .....................................................................................22
3.4.4 Correlated Disk Failures......................................................................................23
3.4.5 Reliability Revisited ............................................................................................24
3.4.6 Summary and Conclusions..................................................................................27
3.5 Implementation Considerations .........................................................................................27
3.5.1 Avoiding Stale Data.............................................................................................28
3.5.2 Regenerating Parity after a System Crash ...........................................................29
3.5.3 Operating with a Failed Disk...............................................................................30
3.5.4 Orthogonal RAID ................................................................................................31
4 ADVANCED TOPICS...........................................................................................32
4.1 Improving Small Write Performance for RAID Level 5 ...................................................32
4.1.1 Buffering and Caching ........................................................................................33
4.1.2 Floating Parity .....................................................................................................34
4.1.3 Parity Logging.....................................................................................................35
4.2 Declustered Parity..............................................................................................................36
4.3 Exploiting On-Line Spare Disks........................................................................................38
4.4 Data Striping in Disk Arrays .............................................................................................40
4.5 Performance and Reliability Modeling..............................................................................43
5 CASE STUDIES....................................................................................................45
5.1 Thinking Machines Corporation ScaleArray.....................................................................46
5.2 StorageTek Iceberg 9200 Disk Array Subsystem ..............................................................47
5.3 NCR 6298 ..........................................................................................................................48
5.4 TickerTAIP/DataMesh .......................................................................................................50
5.5 The RAID-II Storage Server..............................................................................................51
5.6 IBM Hagar Disk Array Controller.....................................................................................52
6 OPPORTUNITIES FOR FUTURE RESEARCH..................................................53
6.1 Experience with Disk Arrays.............................................................................................53
Chen, Lee, Gibson, Katz, Patterson RAID: High-Performance, Reliable Secondary Storage ii
6.2 Interaction among New Organizations ..............................................................................54
6.3 Scalability, Massively Parallel Computers, and Small Disks ............................................54
7 CONCLUSIONS ...................................................................................................56
9 ANNOTATED BIBLIOGRAPHY.........................................................................56
Chen, Lee, Gibson, Katz, Patterson 1
In recent years, interest in RAID, Redundant Arrays of Inexpensive Disks1, has grown explosively.
The driving force behind this phenomenon is the sustained exponential improvements in
the performance and density of semiconductor technology. Improvements in semiconductor technology
make possible faster microprocessors and larger primary memory systems which in turn
require larger, higher-performance secondary storage systems. These improvements have both
quantitative and qualitative consequences.
On the quantitative side, Amdahl’s Law [Amdahl67] predicts that large improvements in
microprocessors will result in only marginal improvements in overall system performance unless
accompanied by corresponding improvements in secondary storage systems. Unfortunately, while
RISC microprocessor performance has been improving 50% or more per year [Patterson94, pg.
27], disk access times, which depend on improvements of mechanical systems, have been improving
less than 10% per year. Disk transfer rates, which track improvements in both mechanical systems
and magnetic media densities, have improved at the faster rate of approximately 20% per
year, but this is still far slower than the rate of processor improvement. Assuming that semiconductor
and disk technologies continue their current trends, we must conclude that the performance
gap between microprocessors and magnetic disks will continue to widen.
In addition to the quantitative effect, a second, perhaps more important, qualitative effect is
driving the need for higher-performance secondary storage systems. As microprocessors become
faster, they make possible new applications and greatly expand the scope of existing applications.
In particular, image-intensive applications such as video, hypertext and multi-media are becoming
common. Even in existing application areas such as computer-aided design and scientific computing,
faster microprocessors make it possible to tackle new problems requiring faster access to
larger datasets. This shift in applications, along with a trend toward large, shared, high-perfor-
1. Because of the restrictiveness of “Inexpensive”, RAID is sometimes said to stand for “Redundant Arrays
of Independent Disks”.
Chen, Lee, Gibson, Katz, Patterson 2
mance, network-based storage systems, is causing us to reevaluate the way we design and use secondary
storage systems [Katz92].
Disk arrays, which organize multiple, independent disks into a large, high-performance logical
disk, are a natural solution to the problem. Disk arrays stripe data across multiple disks and
access them in parallel to achieve both higher data transfer rates on large data accesses and higher
I/O rates on small data accesses [Salem86, Livny87]. Data striping also results in uniform load balancing
across all of the disks, eliminating hot spots that otherwise saturate a small number of disks
while the majority of disks sit idle.
Large disk arrays, however, are highly vulnerable to disk failures; a disk array with a hundred
disks is a hundred times more likely to fail than a single disk. An MTTF (mean-time-to-failure) of
200,000 hours, or approximately twenty-three years, for a single disk implies an MTTF of 2000
hours, or approximately three months, for a disk array with a hundred disks. The obvious solution
is to employ redundancy in the form of error-correcting codes to tolerate disk failures. This allows
a redundant disk array to avoid losing data for much longer than an unprotected single disk.
Redundancy, however, has negative consequences. Since all write operations must update the
redundant information, the performance of writes in redundant disk arrays can be significantly
worse than the performance of writes in non-redundant disk arrays. Also, keeping the redundant
information consistent in the face of concurrent I/O operations and system crashes can be difficult.
A number of different data striping and redundancy schemes have been developed. The combinations
and arrangements of these schemes lead to a bewildering set of options for users and
designers of disk arrays. Each option presents subtle tradeoffs between reliability, performance
and cost that are difficult to evaluate without understanding the alternatives. To address this problem,
this paper presents a systematic tutorial and survey of disk arrays. We describe seven basic
disk array organizations along with their advantages and disadvantages and compare their reliability,
performance and cost. We draw attention to the general principles governing the design and
configuration of disk arrays as well as practical issues that must be addressed in the implementation
of disk arrays. A later section of the paper describes optimizations and variations to the seven
Chen, Lee, Gibson, Katz, Patterson 3
basic disk-array organizations. Finally, we discuss existing research in the modeling of disk arrays
and fruitful avenues for future research. This paper should be of value to anyone interested in disk
arrays, including students, researchers, designers and users of disk arrays.
This section provides basic background material on disks, I/O datapaths, and disk technology
trends for readers who are unfamiliar with secondary storage systems.
2.1 Disk Terminology
Figure 1 illustrates the basic components of a simplified magnetic disk drive. A disk principally
consists of a set of platters coated with a magnetic medium rotating at a constant angular
velocity and a set of disk arms with magnetic read/write heads that are moved radially across the
platters’ surfaces by an actuator. Once the heads are correctly positioned, data is read and written
in small arcs called sectors on the platters’ surfaces as the platters rotate relative to the heads.
Although all heads are moved collectively, in almost every disk drive, only a single head can read
or write data at any given time. A complete circular swath of data is referred to as a track and each
platter’s surface consists of concentric rings of tracks. A vertical collection of tracks at the same
Figure 1: Disk Terminology. Heads reside on arms which are positioned by actuators. Tracks
are concentric rings on a platter. A sector is the basic unit of reads and writes. A cylinder is a
stack of tracks at one actuator position. An HDA (head-disk assembly) is everything in the
figure plus the airtight casing. In some devices it is possible to transfer data from multiple
surfaces simultaneously, but this is both rare and expensive. The collection of heads that
participate in a single logical transfer that is spread over multiple surfaces is called a head
Chen, Lee, Gibson, Katz, Patterson 4
radial position is logically referred to as a cylinder. Sectors are numbered so that a sequential scan
of all sectors traverses the entire disk in the minimal possible time.
Given the simplified disk described above, disk service times can be broken into three primary
components: seek time, rotational latency, and data transfer time. Seek time is the amount of
time needed to move a head to the correct radial position and typically ranges from one to thirty
milliseconds depending on the seek distance and the particular disk. Rotational latency is the
amount of time needed for the desired sector to rotate under the disk head. Full rotation times for
disks currently vary from eight to twenty-eight milliseconds. The data transfer time is dependent
on the rate at which data can be transferred to/from a platter’s surface and is a function of the platter’s
rate of rotation, the density of the magnetic media, and the radial distance of the head from
the center of the platter—some disks use a technique called zone-bit-recording to store more data
on the longer outside tracks than the shorter inside tracks. Typical data transfer rates range from
one to five megabytes per second. The seek time and rotational latency are sometimes collectively
referred to as the head positioning time. Table 1 tabulates the statistics for a typical high-end disk
available in 1993.
Form Factor/Disk Diameter 5.25 inch
Capacity 2.8 GB
Tracks Per Cylinder 21
Sectors Per Track ~99
Bytes Per Sector 512
Full Rotation Time 11.1 ms
(random cylinder to cylinder)
(full stroke seek)
Data Transfer Rate » 4.6 MB/s
Table 1: Specifications for the Seagate ST43401N Elite-3 SCSI Disk Drive. Average seek in this table
is calculated assuming a uniform distribution of accesses. This is the standard way manufacturers report
average seek times. In reality, measurements of production systems show that spatial locality significantly
lowers the effective average seek distance [Hennessy90, pg. 559].
Chen, Lee, Gibson, Katz, Patterson 5
The slow head positioning time and fast data transfer rate of disks lead to very different performance
for a sequence of accesses depending on the size and relative location of each access.
Suppose we need to transfer 1 MB from the disk in Table 1, and the data is laid out in two ways:
sequential within a single cylinder or randomly placed in 8 KB blocks. In either case the time for
the actual data transfer of 1 MB is about 200 ms. But the time for positioning the head goes from
about 16 ms in the sequential layout to about 2000 ms in the random layout. This sensitivity to the
workload is why I/O-intensive applications are categorized as high data rate, meaning minimal
head positioning via large, sequential accesses, or high I/O rate, meaning lots of head positioning
via small, more random accesses. For example, scientific programs that manipulate large arrays of
data fall in the high data rate category, while transaction processing programs fall in the high I/O
2.2 Data Paths
A hierarchy of industry standard interfaces has been defined for transferring data recorded on
a disk platter’s surface to or from a host computer. In this section we review the complete datapath,
from a disk to a users’ application (Figure 2). We assume a read operation for the purposes of this
On the disk platter’s surface, information is represented as reversals in the direction of stored
magnetic fields. These “flux reversals” are sensed, amplified, and digitized into pulses by the lowest-
level read electronics. The protocol ST506/412 is one standard that defines an interface to disk
systems at this lowest, most inflexible, and technology-dependent level. Above this level of the
read electronics path, pulses are decoded to separate data bits from timing-related flux reversals.
The bit-level ESDI and SMD standards define an interface at this more flexible, encoding-independent
level. Then, to be transformed into the highest, most-flexible packet-level, these bits are
aligned into bytes, error correcting codes applied, and the extracted data delivered to the host as
data blocks over a peripheral bus interface such as SCSI (Small Computer Standard Interface), or
IPI-3 (the third level of the Intelligent Peripheral Interface). These steps are performed today by
intelligent on-disk controllers, which often include speed matching and caching “track buffers”.
Chen, Lee, Gibson, Katz, Patterson 6
SCSI and IPI-3 also include a level of data mapping: the computer specifies a logical block number
and the controller embedded on the disk maps that block number to a physical cylinder, track, and
sector. This mapping allows the embedded disk controller to avoid bad areas of the disk by remapping
logical blocks that are affected to new areas of the disk.
Figure 2: Host-to-Device Pathways. Data that is read from a magnetic disk must pass through
many layers on its way to the requesting processor. Each dashed line marks a standard interface.
Lower interfaces such as ST506 deal more closely with the raw magnetic fields and are highly
technology dependent. Higher layers such as SCSI deal in packets or blocks of data and are more
technology independent. A string connects multiple disks to a single I/O controller; control of the
string is distributed between the I/O and disk controllers.
ST506, ST412 (pulses)
SMD, ESDI (bits)
IPI-2, SCSI-1, DEC SDI,
IPI-3, SCSI-1, SCSI-2, DEC CI/MSCP
IBM Channel Path (data blocks)
& Track Buffers
or Host-Bus Adaptor
or Channel Processor
& Track Buffers
Chen, Lee, Gibson, Katz, Patterson 7
Topologies and devices on the data path between disk and host computer vary widely depending
on the size and type of I/O system. Mainframes have the richest I/O systems, with many
devices and complex interconnection schemes to access them. An IBM channel path, which
encompasses the set of cables and associated electronics that transfer data and control information
between an I/O device and main memory, consists of a channel, a storage director, and a head of
string. The collection of disks that share the same pathway to the head of string is called a string.
In the workstation/file server world, the channel processor is usually called an I/O controller or
host-bus adaptor (HBA) and the functionality of the storage director and head of string is contained
in an embedded controller on the disk drive. As in the mainframe world, the use of highlevel
peripheral interfaces such as SCSI and IPI-3 allow multiple disks to share a single peripheral
bus or string.
From the host-bus adaptor, data is transferred via direct memory access, over a system bus,
such as VME, S-Bus, MicroChannel, EISA, or PCI, to the host operating system’s buffers. In most
operating systems, the CPU then performs a memory-to-memory copy over a high-speed memory
bus from the operating system buffers to buffers in the application’s address space.
2.3 Technology Trends
Much of the motivation for disk arrays comes from the current trends in disk technology. As
Table 2 shows, magnetic disk drives have been improving rapidly by some metrics and hardly at
all by other metrics. Smaller distances between the magnetic read/write head and the disk surface,
more accurate positioning electronics, and more advanced magnetic media have dramatically
increased the recording density on the disks. This increased density has improved disks in two
ways. First, it has allowed disk capacities to stay constant or increase, even while disk sizes have
decreased from 5.25” in 1983 to 1.3” in 1993. Second, the increased density, along with an
increase in the rotational speed of the disk, has made possible a substantial increase in the transfer
rate of disk drives. Seek times, on the other hand, have improved very little, only decreasing from
approximately 20 ms in 1980 to 10 ms today. Rotational speeds have increased at a similarly slow
rate from 3600 revolutions per minute in 1980 to 5400-7200 today.
Chen, Lee, Gibson, Katz, Patterson 8
3 DISK ARRAY BASICS
This section examines basic issues in the design and implementation of disk arrays. In particular,
we examine the concepts of data striping and redundancy; basic RAID organizations; performance
and cost comparisons between the basic RAID organizations; reliability of RAID-based
systems in the face of system crashes, uncorrectable bit-errors and correlated disk failures; and
finally, issues in the implementation of block-interleaved, redundant disk arrays.
3.1 Data Striping and Redundancy
Redundant disk arrays employ two orthogonal concepts: data striping for improved performance
and redundancy for improved reliability. Data striping transparently distributes data over
multiple disks to make them appear as a single fast, large disk. Striping improves aggregate I/O
performance by allowing multiple I/Os to be serviced in parallel. There are two aspects to this parallelism.
First, multiple, independent requests can be serviced in parallel by separate disks. This
decreases the queueing time seen by I/O requests. Second, single, multiple-block requests can be
serviced by multiple disks acting in coordination. This increases the effective transfer rate seen by
a single request. The more disks in the disk array, the larger the potential performance benefits.
Unfortunately, a large number of disks lowers the overall reliability of the disk array, as mentioned
27% per year
13% per year
10% per year
(3.5” form factor)
100-2000 MB 27% per year
Transfer Rate 3-4 MB/s 22% per year
Seek Time 7-20 ms 8% per year
Table 2: Trends in Disk Technology. Magnetic disks are improving rapidly in density and capacity, but
more slowly in performance. Areal density is the recording density per square inch of magnetic media. In
1989, IBM demonstrated a 1 Gbit/sq. inch density in a laboratory environment. Linear density is the
number of bits written along a track. Inter-track density refers to the number of concentric tracks on a
Chen, Lee, Gibson, Katz, Patterson 9
before. Assuming independent failures, 100 disks collectively have only 1/100th the reliability of a
single disk. Thus, redundancy is necessary to tolerate disk failures and allow continuous operation
without data loss.
We will see that the majority of redundant disk array organizations can be distinguished based
on two features: 1) the granularity of data interleaving and 2) the method and pattern in which the
redundant information is computed and distributed across the disk array. Data interleaving can be
characterized as either fine-grained or coarse-grained. Fine-grained disk arrays conceptually interleave
data in relatively small units so that all I/O requests, regardless of their size, access all of the
disks in the disk array. This results in very high data transfer rates for all I/O requests but has the
disadvantages that only one logical I/O request can be in service at any given time and all disks
must waste time positioning for every request. Coarse-grained disk arrays interleave data in relatively
large units so that small I/O requests need access only a small number of disks while large
requests can access all the disks in the disk array. This allows multiple, small requests to be serviced
simultaneously while still allowing large requests to see the higher transfer rates afforded by
using multiple disks.
The incorporation of redundancy in disk arrays brings up two somewhat orthogonal problems.
The first problem is selecting the method for computing the redundant information. Most
redundant disk arrays today use parity, though some use Hamming or Reed-Solomon codes. The
second problem is that of selecting a method for distributing the redundant information across the
disk array. Although there are an unlimited number of patterns in which redundant information can
be distributed, we roughly classify these patterns into two different distributions schemes, those
that concentrate redundant information on a small number of disks and those that distributed
redundant information uniformly across all of the disks. Schemes that uniformly distribute redundant
information are generally more desirable because they avoid hot spots and other load balancing
problems suffered by schemes that do not uniformly distribute redundant information.
Although the basic concepts of data striping and redundancy are conceptually simple, selecting
between the many possible data striping and redundancy schemes involves complex tradeoffs
between reliability, performance and cost.
Chen, Lee, Gibson, Katz, Patterson 10
3.2 Basic RAID Organizations
This section describes the basic RAID, Redundant Arrays of Inexpensive Disks, organizations
that will be used as the basis for further examinations of the performance, cost, and reliability
of disk arrays. In addition to presenting RAID levels 1 through 5 that first appeared in the landmark
paper by Patterson, Gibson and Katz [Patterson88], we present two other RAID organizations,
RAID levels 0 and 6, that have since become generally accepted1. For the benefit of those
unfamiliar with the original numerical classification of RAID, we will use English phrases in preference
to the numerical classifications. It should come as no surprise to the reader that even the
original authors have sometimes been confused as to the disk array organization referred to by a
particular RAID level! Figure 3 schematically illustrates the seven RAID organizations.
3.2.1 Non-Redundant (RAID Level 0)
A non-redundant disk array, or RAID level 0, has the lowest cost of any RAID organization
because it does not employ redundancy at all. This scheme offers the best write performance since
it never needs to update redundant information. Surprisingly, it does not have the best read performance.
Redundancy schemes that duplicate data, such as mirroring, can perform better on reads by
selectively scheduling requests on the disk with the shortest expected seek and rotational delays
[Bitton88]. Without redundancy, any single disk failure will result in data-loss. Non-redundant
disk arrays are widely used in supercomputing environments where performance and capacity,
rather than reliability, are the primary concerns.
3.2.2 Mirrored (RAID Level 1)
The traditional solution, called mirroring or shadowing, uses twice as many disks as a nonredundant
disk array [Bitton88]. Whenever data is written to a disk the same data is also written to
a redundant disk, so that there are always two copies of the information. When data is read, it can
be retrieved from the disk with the shorter queueing, seek and rotational delays [Chen90a]. If a
disk fails, the other copy is used to service requests. Mirroring is frequently used in database appli-
1. Strictly speaking, RAID Level 0 is not a type of redundant array of inexpensive disks since it stores no
Chen, Lee, Gibson, Katz, Patterson 11
Figure 3:RAID Levels 0 Through 6. All RAID levels are illustrated at a user capacity of four
disks. Disks with multiple platters indicate block-level striping while disks without multiple
platters indicate bit-level striping. The shaded platters represent redundant information.
Non-Redundant (RAID Level 0)
Mirrored (RAID Level 1)
Memory-Style ECC (RAID Level 2)
Bit-Interleaved Parity (RAID Level 3)
Block-Interleaved Parity (RAID Level 4)
Block-Interleaved Distributed-Parity (RAID Level 5)
P+Q Redundancy (RAID Level 6)
Chen, Lee, Gibson, Katz, Patterson 12
cations where availability and transaction rate are more important than storage efficiency
3.2.3 Memory-Style ECC (RAID Level 2)
Memory systems have provided recovery from failed components with much less cost than
mirroring by using Hamming codes [Peterson72]. Hamming codes contain parity for distinct overlapping
subsets of components. In one version of this scheme, four data disks require three redundant
disks, one less than mirroring. Since the number of redundant disks is proportional to the log
of the total number of disks in the system, storage efficiency increases as the number of data disks
If a single component fails, several of the parity components will have inconsistent values,
and the failed component is the one held in common by each incorrect subset. The lost information
is recovered by reading the other components in a subset, including the parity component, and setting
the missing bit to 0 or 1 to create the proper parity value for that subset. Thus, multiple redundant
disks are needed to identify the failed disk, but only one is needed to recover the lost
Readers unfamiliar with parity can think of the redundant disk as having the sum of all the
data in the other disks. When a disk fails, you can subtract all the data on the good disks from the
parity disk; the remaining information must be the missing information. Parity is simply this sum
3.2.4 Bit-Interleaved Parity (RAID Level 3)
One can improve upon memory-style ECC disk arrays by noting that, unlike memory component
failures, disk controllers can easily identify which disk has failed. Thus, one can use a single
parity disk rather than a set of parity disks to recover lost information.
In a bit-interleaved, parity disk array, data is conceptually interleaved bit-wise over the data
disks, and a single parity disk is added to tolerate any single disk failure. Each read request
Chen, Lee, Gibson, Katz, Patterson 13
accesses all data disks and each write request accesses all data disks and the parity disk. Thus, only
one request can be serviced at a time. Because the parity disk contains only parity and no data, the
parity disk cannot participate on reads, resulting in slightly lower read performance than for redundancy
schemes that distribute the parity and data over all disks. Bit-interleaved, parity disk arrays
are frequently used in applications that require high bandwidth but not high I/O rates. They are
also simpler to implement than RAID Levels 4, 5, and 6.
3.2.5 Block-Interleaved Parity (RAID Level 4)
The block-interleaved, parity disk array is similar to the bit-interleaved, parity disk array
except that data is interleaved across disks in blocks of arbitrary size rather than in bits. The size of
these blocks is called the striping unit [Chen90b]. Read requests smaller than the striping unit
access only a single data disk. Write requests must update the requested data blocks and must also
compute and update the parity block. For large writes that touch blocks on all disks, parity is easily
computed by exclusive-or’ing the new data for each disk. For small write requests that update only
one data disk, parity is computed by noting how the new data differs from the old data and applying
those differences to the parity block. Small write requests thus require four disk I/Os: one to
write the new data, two to read the old data and old parity for computing the new parity, and one to
write the new parity. This is referred to as a read-modify-write procedure. Because a block-interleaved,
parity disk array has only one parity disk, which must be updated on all write operations,
the parity disk can easily become a bottleneck. Because of this limitation, the block-interleaved
distributed-parity disk array is universally preferred over the block-interleaved, parity disk array.
3.2.6 Block-Interleaved Distributed-Parity (RAID Level 5)
The block-interleaved distributed-parity disk array eliminates the parity disk bottleneck
present in the block-interleaved parity disk array by distributing the parity uniformly over all of the
disks. An additional, frequently overlooked advantage to distributing the parity is that it also distributes
data over all of the disks rather than over all but one. This allows all disks to participate in
servicing read operations in contrast to redundancy schemes with dedicated parity disks in which
the parity disk cannot participate in servicing read requests. Block-interleaved distributed-parity
Chen, Lee, Gibson, Katz, Patterson 14
disk arrays have the best small read, large read and large write performance of any redundant disk
array. Small write requests are somewhat inefficient compared with redundancy schemes such as
mirroring however, due to the need to perform read-modify-write operations to update parity. This
is the major performance weakness of RAID level 5 disk arrays and has been the subject of intensive
research [Menon93b, Stodolsky93].
The exact method used to distribute parity in block-interleaved distributed-parity disk arrays
can affect performance. Figure 4 illustrates the best parity distribution of those investigated in
[Lee91b], called the left-symmetric parity distribution. A useful property of the left-symmetric
parity distribution is that whenever you traverse the striping units sequentially, you will access
each disk once before accessing any disk twice. This property reduces disk conflicts when servicing
3.2.7 P+Q Redundancy (RAID Level 6)
Parity is a redundancy code capable of correcting any single, self-identifying failure. As
larger disk arrays are considered, multiple failures are possible and stronger codes are needed
[Burkhard93]. Moreover, when a disk fails in a parity-protected disk array, recovering the contents
of the failed disk requires successfully reading the contents of all non-failed disks. As we will see
in Section 3.4, the probability of encountering an uncorrectable read error during recovery can be
0 1 2 3 P0
5 6 7 P1 4
10 11 P2 8 9
15 P3 12 13 14
P4 16 17 18 19
Figure 4: RAID level 5 Left-Symmetric Parity Placement. Each square corresponds to a stripe
unit. Each column of squares corresponds to a disk. P0 computes the parity over stripe units 0, 1,
2 and 3; P1 computes parity over stripe units 4, 5, 6 and 7; etc. Lee [Lee91b] shows that the leftsymmetric
parity distribution has the best performance. Only the minimum repeating pattern is
Chen, Lee, Gibson, Katz, Patterson 15
significant. Thus, applications with more stringent reliability requirements require stronger errorcorrecting
One such scheme, called P+Q redundancy, uses Reed-Solomon codes to protect against up to
two disk failures using the bare minimum of two redundant disks. The P+Q redundant disk arrays
are structurally very similar to the block-interleaved distributed-parity disk arrays and operate in
much the same manner. In particular, P+Q redundant disk arrays also perform small write operations
using a read-modify-write procedure, except that instead of four disk accesses per write
requests, P+Q redundant disk arrays require six disk accesses due to the need to update both the
‘P’ and ‘Q’ information.
3.3 Performance and Cost Comparisons
The three primary metrics in the evaluation of disk arrays are reliability, performance, and
cost. RAID levels 0 through 6 cover a wide range of tradeoffs between these metrics. It is important
to consider all three metrics to fully understand the value and cost of each disk array organization.
In this section, we compare RAID levels 0 through 6 based on performance and cost. The
following section examines reliability.
3.3.1 Ground Rules and Observations
While there are only three primary metrics in the evaluation of disk arrays (reliability, performance
and cost), there are many different ways to measure each metric and an even larger number
of ways of using them. For example, should performance be measured in I/Os per second, bytes
per second, or response time? Would a hybrid metric such as I/Os per second per dollar be more
appropriate? Once a metric is agreed upon, should we compare systems at the same cost, the same
total user capacity, the same performance, or the same reliability? The method one uses depends
largely on the purpose of the comparison and the intended use of the system. In time-sharing applications,
the primary metric may be user capacity per dollar; in transaction processing applications
the primary metric may be I/Os per second per dollar; and in scientific applications, the primary
metric may be bytes per second per dollar. In certain heterogeneous systems, such as file servers,
Chen, Lee, Gibson, Katz, Patterson 16
both I/O per second and bytes per second may be important. In many cases, these metrics may all
be conditioned on meeting a reliability threshold.
Most large secondary storage systems, and disk arrays in particular, are throughput oriented.
That is, we are generally more concerned with the aggregate throughput of the system than, for
example, its response time on individual requests (as long as requests are satisfied within a specified
time limit). Such a bias has a sound technical basis: as techniques such as asynchronous I/O,
prefetching, read caching and write buffering become more widely used, fast response time
depends on sustaining a high throughput.
In throughput-oriented systems, performance can potentially increase linearly as additional
components are added; if one disk provides thirty I/Os per second, two should provide sixty I/Os
per second. Thus, in comparing the performance of disk arrays, we will normalize the performance
of the system by its cost. In other words we will use performance metrics such as I/Os per second
per dollar rather than the absolute number of I/Os per second.
Even after the metrics are agreed upon, one must decide whether to compare systems of
equivalent capacity, cost or some other metric. We chose to compare systems of equivalent file
capacity where file capacity is the amount of information the file system can store on the device
and excludes the storage used for redundancy. Comparing systems with the same file capacity
makes it easy to choose equivalent workloads for two different redundancy schemes. Were we to
compare systems with different file capacities, we would be confronted with tough choices such as
how a workload on a system with user capacity X maps onto a system with user capacity 2X.
Finally, there is currently much confusion in comparing RAID levels 1 through 5. The confusion
arises because a RAID level sometimes specifies not a specific implementation of a system
but rather its configuration and use. For example, a RAID level 5 disk array (block-interleaved distributed-
parity) with a parity group size of two is comparable to RAID level 1 (mirroring) with the
exception that in a mirrored disk array, certain disk scheduling and data layout optimizations can
be performed that generally are not implemented for RAID level 5 disk arrays [Hsiao90, Orji93].
Analogously, a RAID level 5 disk array can be configured to operate equivalently to a RAID level
Chen, Lee, Gibson, Katz, Patterson 17
3 disk array by choosing a unit of data striping such that the smallest unit of array access always
accesses a full parity stripe of data. In other words, RAID level 1 and RAID level 3 disk arrays can
be viewed as a subclass of RAID level 5 disk arrays. Since RAID level 2 and RAID level 4 disk
arrays are, practically speaking, in all ways inferior to RAID level 5 disk arrays, the problem of
selecting among RAID levels 1 through 5 is a subset of the more general problem of choosing an
appropriate parity group size and striping unit size for RAID level 5 disk arrays. A parity group
size close to two may indicate the use of RAID level 1 disk arrays; a striping unit much smaller
than the size of an average request may indicate the use of a RAID level 3 disk array.
Table 3 tabulates the maximum throughput per dollar relative to RAID level 0 for RAID levels
0, 1, 3, 5 and 6. The cost of each system is assumed to be proportional to the total number of
disks in the disk array. Thus, the table illustrates that given equivalent cost RAID level 0 and
RAID level 1 systems, the RAID level 1 system can sustain half the number of small writes per
second that a RAID level 0 system can sustain. Equivalently, we can say that the cost of small
writes is twice as expensive in a RAID level 1 system as in a RAID level 0 system. In addition to
performance, the table shows the storage efficiency of each disk array organization. The storage
efficiency is approximately inverse the cost of each unit of user capacity relative to a RAID level 0
Small Read Small Write Large Read Large Write Storage Efficiency
RAID level 0 1 1 1 1 1
RAID level 1 1 1/2 1 1/2 1/2
RAID level 3 1/G 1/G (G-1)/G (G-1)/G (G-1)/G
RAID level 5 1 max(1/G,1/4) 1 (G-1)/G (G-1)/G
RAID level 6 1 max(1/G,1/6) 1 (G-2)/G (G-2)/G
Table 3: Throughput Per Dollar Relative to RAID Level 0. This table compares the throughputs of
various redundancy schemes for four types of I/O requests. Small here refers to I/O requests of one
striping unit; large refers to I/O requests of one full stripe (one stripe unit from each disk in an errorcorrection
group). G refers to the number of disks in an error-correction group. In all cases, the higher the
number the better. The entries in this table account for the major performance effects but not some of the
second-order effects. For instance, since RAID level 1 stores two copies of the data, a common
optimization is to dynamically read the disk whose positioning time to the data is smaller.
Chen, Lee, Gibson, Katz, Patterson 18
system. For the above disk array organizations, the storage efficiency is equal to the performance/
cost metric for large writes.
Figure 5 graphs the performance/cost metrics from Table 3 for RAID levels 1, 3, 5 and 6 over
a range of parity group sizes. The performance/cost of RAID level 1 systems is equivalent to the
performance/cost of RAID level 5 systems when the parity group size is equal to two. The perfor-
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0
RAID 5 & 6
RAID 5 & 6
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0
RAID 3 & 5
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0
RAID 3, 5 & 6
Small Reads Small Writes
Large Reads Large Writes
Figure 5: Throughput Per Dollar Relative to RAID Level 0. RAID level 1 performance is
approximately equal to RAID level 5 performance with a group size of two. Note that for small
writes, the three disk arrays are equally cost effective at small group sizes, but as group size
increases, RAID levels 5 and 6 become better alternatives.
RAID 1 RAID 1
Chen, Lee, Gibson, Katz, Patterson 19
mance/cost of RAID level 3 systems is always less than or equal to the performance/cost of RAID
level 5 systems. This is expected given that a RAID level 3 system is a subclass of RAID level 5
systems derived by restricting the striping unit size such that all requests access exactly a parity
stripe of data. Since the configuration of RAID level 5 systems is not subject to such a restriction,
the performance/cost of RAID level 5 systems can never be less than that of an equivalent RAID
level 3 system. It is important to stress that these performance/cost observations apply only to the
abstract models of disk arrays for which we have formulated performance/cost metrics. In reality, a
specific implementation of a RAID level 3 system can have better performance/cost than a specific
implementation of a RAID level 5 system.
As previously mentioned, the question of which RAID level to use is often better expressed as
more general configuration questions concerning the size of the parity group and striping unit. If a
parity group size of two is indicated, then mirroring is desirable. If a very small striping unit is
indicated then a RAID level 3 system may be sufficient. To aid the reader in evaluating such decisions,
Figure 6 plots the four performance/cost metrics from Table 3 on the same graph for each of
the RAID levels 3, 5 and 6. This makes explicit the performance/cost tradeoffs in choosing an
appropriate parity group size. Section 4.4 addresses how to choose the unit of striping.
Reliability is as important a metric to many I/O systems as performance and cost, and it is
perhaps the main reason for the popularity of redundant disk arrays. This section starts by reviewing
the basic reliability provided by a block-interleaved parity disk array then lists three factors
that can undermine the potential reliability of disk arrays.
3.4.1 Basic Reliability
Redundancy in disk arrays is motivated by the need to overcome disk failures. When only
independent disk failures are considered, a simple parity scheme works admirably. Patterson, Gibson,
and Katz derive the mean time between failures for a RAID level 5 to be
, where MTTF(disk) is the mean-time-to-failure of a single disk,
N´(G- 1)´ MTTR(disk)
Chen, Lee, Gibson, Katz, Patterson 20
MTTR(disk) is the mean-time-to-repair of a single disk, N is the total number of disks in the disk
array, and G is the parity group size [Patterson88]. For illustration purposes, let us assume we have
100 disks that each had a mean time to failure (MTTF) of 200,000 hours and a mean time to repair
of one hour. If we organized these 100 disks into parity groups of average size 16, then the mean
time to failure of the system would be an astounding 3000 years! Mean times to failure of this
magnitude lower the chances of failure over any given period of time.
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0 0.5
RAID Level 3 RAID Level 5
RAID Level 6
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0
Small & Large Reads
0 5 10 15 20
Throughput Per Dollar
Relative to RAID Level 0
Large Reads & Writes
Small Reads & Writes
Small & Large Reads
Figure 6: Throughput Per Dollar Relative to RAID Level 0. The graphs illustrate the tradeoff
in performance/cost versus group size for each specified RAID level. Note that in this
comparison, mirroring (RAID level 1) is the same as RAID level 5 with a group size of two.
Chen, Lee, Gibson, Katz, Patterson 21
For a disk array with two redundant disk per parity group, such as P+Q redundancy, the mean
tim to failure is . Using the same values for our reliability
parameters, this implies an astronomically large mean time to failure of 38 million years.
This is an idealistic picture, but it gives us an idea of the potential reliability afforded by disk
arrays. The rest of this section takes a more realistic look at the reliability of block-interleaved disk
arrays by considering factors such as system crashes, uncorrectable bit-errors, and correlated disk
failures that can dramatically affect the reliability of disk arrays.
3.4.2 System Crashes and Parity Inconsistency
In this section, the term system crash refers to any event such as a power failure, operator
error, hardware breakdown, or software crash that can interrupt an I/O operation to a disk array.
Such crashes can interrupt write operations, resulting in states where the data is updated and the
parity is not updated, or visa versa. In either case, the parity is inconsistent and cannot be used in
the event of a disk failure. Techniques such as redundant hardware and power supplies can be
applied to make such crashes less frequent [Menon93a], but no technique can prevent systems
crashes 100% of the time.
System crashes can cause parity inconsistencies in both bit-interleaved and block-interleaved
disk arrays, but the problem is of practical concern only in block-interleaved disk arrays. This is
because in bit-interleaved disk arrays, the inconsistent parity can only affect the data that is currently
being written. If writes do not have to be atomic, applications cannot assume either that the
write during a system crash completed or did not complete, and thus it is generally permissible for
the bit-interleaved disk array to store arbitrary data on the updated sectors. In a block-interleaved
disk array, however, an interrupted write operation can affect the parity of other data blocks in that
stripe that were not being written. Thus, for reliability purposes, system crashes in block-interleaved
disk arrays are similar to disk failures in that they may result in the loss of the correct parity
for stripes that were being modified during the crash.
N´(G- 1)´(G - 2)´ MTTR2(disk)
Chen, Lee, Gibson, Katz, Patterson 22
In actuality, system crashes can be much worse than disk failures for two reasons. First, they
may occur more frequently than disk failures. Second, a system crash in disk arrays using P+Q
redundancy is analogous to a double disk failure because both the ‘P’ and ‘Q’ information is made
inconsistent. To avoid the loss of parity on system crashes, information sufficient to recover the
parity must be logged to non-volatile storage before executing each write operation. The information
need only be saved until the corresponding write completes. Hardware implementations of
RAID systems can efficiently implement such logging using non-volatile RAM. In software implementations
that do not have access to fast non-volatile storage, it is generally not possible to protect
against system crashes without significantly sacrificing performance.
3.4.3 Uncorrectable Bit-Errors
Although modern disks are highly reliable devices that can withstand significant amounts of
abuse, they occasionally fail to read or write small bits of data. Currently, most disks cite uncorrectable
bit error rates of one error in 1014 bits read. Unfortunately, the exact interpretation of what
is meant by an uncorrectable bit error is unclear. For example, does the act of reading disks actually
generate errors, or do the errors occur during writes and become evident during reads?
Disk manufactures generally agree that reading a disk is very unlikely to cause permanent
errors. Most uncorrectable errors are generated because data is incorrectly written or gradually
damaged as the magnetic media ages. These errors are detected only when we attempt to read the
data. Our interpretation of uncorrectable bit error rates is that they represent the rate at which
errors are detected during reads from the disk during the normal operation of the disk drive. It is
important to stress that there is no generally agreed upon interpretation of bit error rates.
The primary ramification of an uncorrectable bit error is felt when a disk fails and the contents
of the failed disk must be reconstructed by reading data from the non-failed disks. For example,
the reconstruction of a failed disk in a 100 GB disk array requires the successful reading of
approximately 200 million sectors of information. A bit error rate of one in 1014 bits implies that
one 512 byte sector in 24 billion sectors cannot be correctly read. Thus, if we assume that the probability
of reading sectors is independent of each other, the probability of reading all 200 million
Chen, Lee, Gibson, Katz, Patterson 23
sectors successfully is approximately (1-1/(2.4 ´ 1010))^(2.0 ´ 108) = 99.2%. This means that on
average, 0.8% of disk failures would result in data loss due to an uncorrectable bit error.
The above example indicates that unrecoverable bit errors can be a significant factor in
designing large, highly-reliable disk arrays. This conclusion is heavily dependent on our particular
interpretation of what is meant by an unrecoverable bit error and the guaranteed unrecoverable bit
error rates as supplied by the disk manufactures; actual error rates may be much better.
One approach that can be used with or without redundancy is to try to protect against bit
errors by predicting when a disk is about to fail. VAXsimPLUS, a product from Digital Equipment
Corporation, monitors the warnings given by disks and notifies an operator when it feels the disk is
about to fail. Such predictions can significantly lower incident of data loss [Emlich89, Malhotra93].
3.4.4 Correlated Disk Failures
The simplest model of reliability of disk arrays [Patterson88] assumes that all disk failures are
independent when calculating mean time to data loss. This resulted in very high mean time to data
loss estimates, up to millions of years. In reality, common environmental and manufacturing factors
can frequently cause correlated disk failures. For example, an earthquake might sharply
increase the failure rate for all disks in a disk array for a short period of time. More commonly,
power surges, power failures, and simply the act of powering disks on and off can place simultaneous
stress on the electrical components of all affected disks. Disks also share common support
hardware; when this hardware fails, it can lead to multiple, simultaneous disk failures.
Aside from environmental factors, the disks themselves have certain correlated failure modes
built into them. For example, disks are generally more likely to fail either very early or very late in
their lifetimes. Early failures are frequently caused by transient defects which may not have been
detected during the manufacturer’s burn-in process; late failures occur when a disk wears out. A
systematic manufacturing defect can also produce bad batches of disks that can fail close together
in time. Correlated disk failures greatly reduce the reliability of disk arrays by making it much
Chen, Lee, Gibson, Katz, Patterson 24
more likely that an initial disk failure will be closely followed by additional disk failures before the
failed disk can be reconstructed.
3.4.5 Reliability Revisited
The previous sections have described how system crashes, uncorrectable bit errors and correlated
disk failures can decrease the reliability of redundant disk arrays. In this section, we will calculate
mean-time-to-data-loss statistics after incorporating these factors.
The new failure modes imply that there are now three, relatively common ways to lose data
in a block-interleaved parity-protected disk array:
• double disk failure,
• system crash followed by a disk failure, and
• disk failure followed by an uncorrectable bit error during reconstruction.
Total User Capacity 100 disks (500 GB)
Disk Size 5 GB
Sector Size 512 bytes
Bit Error Rate (BER)
1 in 10^14 bits
1 in 2.4 10^10 sectors
The probability of reading
all sectors on a disk.
(Derived from disk size,
sector size, and BER.)
Parity Group Size 16 disks
MTTF(disk) 200,000 hours
MTTF(disk2) 20,000 hours
MTTF(disk3) 2,000 hours
MTTR(disk) 1 hour
MTTF(sys) 1 month
MTTR(sys) 1 hour
Table 4: Reliability Parameters. This table lists parameters used for reliability calculations in this
Chen, Lee, Gibson, Katz, Patterson 25
As mentioned above, a system crash followed by a disk failure can be protected against in
most hardware disk array implementations with the help of non-volatile storage, but such protection
is unlikely in software disk arrays. The above three failure modes are the hardest failure combinations,
in that we are currently unaware of any techniques to protect against them without
significantly degrading performance. To construct a simple model of correlated disk failures, we
will assume that each successive disk failure is ten times more likely than the previous failure
(until the failed disk has been reconstructed). Table 4 tabulates values of the reliability parameters
we will use for calculating numeric reliability estimates in this section. Note that the reliability
estimates will be given per a constant user capacity of 100 disks, consisting of independent, 16-
disk parity groups.
Table 5, which tabulates reliability metrics for RAID level 5 disk arrays, shows that the frequency
of the three failure combinations are within an order of magnitude of each other. This
means that none of the three failure modes can be ignored in determining reliability. This makes it
difficult to improve the overall reliability of the system without improving the reliability of several
Table 5: Failure Characteristics for RAID Level 5 Disk Arrays. MTTDL is the mean time to data
loss. The 10 year failure rate is the percent chance of data loss in a 10 year period. For numeric
calculations, the parity group size, G, is equal to 16 and the user data capacity is equal to 100
data disks. Note that the total number of disks in the system, N, is equal to the number of data
disks times G/(G-1).
Data Loss over
10 Year Period
Double Disk Failure 285 yrs. 3.4%
Sys Crash + Disk Failure 154 yrs. 6.3%
Disk Failure + Bit Error
36 yrs. 24.4%
Software RAID (harmonic sum of above) 26 yrs. 31.6%
Hardware RAID (NVRAM)
(harmonic sum excluding
sys crash+disk failure)
32 yrs. 26.8%
N´(G- 1)´ MTTR(disk)
N ´ MTTR(sys)
N ´(1 -(p(disk))G - 1)
Chen, Lee, Gibson, Katz, Patterson 26
components of the system; a more reliable disk will greatly reduce the frequency of double disk
failures but its protection against the other two failure combinations is less pronounced. Frequencies
of both system crashes and bit error rates must also be reduced before significant improvements
in overall system reliability can be achieved. Note also the deceptively reassuring MTTDL
numbers. Even with a MTTDL of 285 years, there is a 3.4% chance of losing data in the first ten
Table 6 tabulates the reliability metrics for P+Q redundant disk arrays. As can be seen, system
crashes are the Achilles’s heel of P+Q redundancy schemes. Since system crashes invalidate both
the P and Q information, their effect is similar to a double disk failure. Thus, unless the system
provides protection against system crashes, as is assumed in the calculation of the reliability for
hardware RAID systems, P+Q redundancy does not provide a significant advantage over parity-
Table 6: Failure Characteristics for a P+Q disk array. MTTDL is the mean time to data loss. The
10 year failure rate is the percent chance of data loss in a 10 year period. For numeric
calculations, the parity group size, G, is equal to 16 and the user data capacity is equal to 100
data disks. Note that the total number of disks in the system, N, is equal to the number of data
disks times G/(G-2).
38052 yrs. 0.03%
Sys Crash +
Disk Failure 144 yrs. 7.7%
+ Bit Error
47697 yrs. 0.02%
(harmonic sum of above) 143 yrs. 6.8%
(harmonic sum excluding sys crash+disk failure) 21166 yrs. 0.05%
MTTF(disk)´ MTTF(disk2)´ MTTF(disk3 ))
N (G- 1)´(G - 2) MTTR2 ´ ´ (disk)
N ´ MTTR(sys)
MTTF(disk)´ MTTF(disk2 ))
N´(G- 1) 1 (1-p(disk )))´(- (G - 2))´MTTR(disk)
Chen, Lee, Gibson, Katz, Patterson 27
protected disk arrays. In general, P+Q redundancy is most useful for protecting against unrecoverable
bit errors that occur during reconstruction and against multiple, correlated disk failures.
3.4.6 Summary and Conclusions
This section has examined the reliability of block-interleaved redundant disk arrays when factors
other than independent disk failures are taken into account. We see that system crashes and
unrecoverable bit errors can significantly reduce the reliability of block-interleaved, parity-protected
disk arrays. We have shown that P+Q redundant disk arrays are very effective in protecting
against both double disk failures and unrecoverable bit errors but are susceptible to system
crashes. In order to realize the full reliability advantages of P+Q redundant disk arrays, non-volatile
storage must be used to protect against system crashes.
Numeric reliability calculations serve as useful guidelines and bounds for the actual reliability
of disk arrays. It is infeasible, however, to compare the reliability of real system based on such
numbers. Reliability calculations frequently ignore important implementation-specific factors that
are difficult to quantify such as the reliability of software components. What is useful to know,
however, and what we have presented here, is the types of common failures that a disk array can
tolerate, how they limit the reliability of the system, and thus its approximate reliability in comparison
to other disk array organizations of similar complexity.
3.5 Implementation Considerations
Although the operation of block-interleaved redundant disk arrays is conceptually simple, a
disk array implementer must address many practical considerations for the system to function correctly
and reliably at an acceptable level of performance. One problem is that the necessary state
information for a disk array consists of more than just the data and parity stored on the disks. Information
such as which disks are failed, how much of a failed disk has been reconstructed, and
which sectors are currently being updated must be accurately maintained in the face of system
crashes. We will refer to such state information that is neither user data nor parity as meta state
Chen, Lee, Gibson, Katz, Patterson 28
information. Another problem, addressed in Section 3.5.4, is that multiple disks are usually connected
to the host computer via a common bus or string.
3.5.1 Avoiding Stale Data
The only piece of meta state information that must be maintained in redundant disk arrays is
the validity of each sector of data and parity in a disk array. The following restrictions must be
observed in maintaining this information.
• When a disk fails, the logical sectors corresponding to the failed disk must be marked invalid
before any request that would normally access to the failed disk can be attempted. This invalid
mark prevents users from reading corrupted data on the failed disk.
• When an invalid logical sector is reconstructed to a spare disk, the logical sector must be
marked valid before any write request that would normally write to the failed disk can be serviced.
This ensures that ensuing writes update the reconstructed data on the spare disk.
Both restrictions are needed to ensure that users do not receive stale data from the disk array.
Without the first restriction, it would be possible for users to read stale data from a disk that is considered
to have failed but works intermittently. Without the second restriction, successive write
operations would fail to update the newly reconstructed sector, resulting in stale data. The valid/
invalid state information can be maintained as a bit-vector either on a separate device or by reserving
a small amount of storage on the disks currently configured into the disk array. If one keeps
track of which disks are failed/operational, one only needs to keep a bit-vector for the failed disks.
It is generally more convenient to maintain the valid/invalid state information on a per striping unit
rather than a per sector basis since most implementations will tend to reconstruct an entire striping
unit of data at a time rather than a single sector. Because disk failures are relatively rare events and
large groups of striping units can be invalidated at a time, updating the valid/invalid meta state
information to stable storage does not present a significant performance overhead.
Chen, Lee, Gibson, Katz, Patterson 29
3.5.2 Regenerating Parity after a System Crash
System crashes can result in inconsistent parity by interrupting write operations. Thus, unless
it is known which parity sectors were being updated, all parity sectors must be regenerated whenever
a disk array comes up from a system crash. This is an expensive operation that requires scanning
the contents of the entire disk array. To avoid this overhead, information concerning the
consistent/inconsistent state of each parity sector must be logged to stable storage. The following
restriction must be observed.
• Before servicing any write request, the corresponding parity sectors must be marked inconsistent.
• When bringing a system up from a system crash, all inconsistent parity sectors must be regenerated.
Note that because regenerating a consistent parity sector does no harm, it is not absolutely
necessary to mark a parity sector as consistent. To avoid having to regenerate a large number of
parity sectors after each crash, however, it is clearly desirable to periodically mark parity sectors as
Unlike updating valid/invalid information, the updating of consistent/inconsistent state information
is a potential performance problem in software RAID systems, which usually do not have
access to fast, non-volatile storage. A simplistic implementation would require a disk write to
mark a parity sector as inconsistent before each write operation and a corresponding disk write to
mark the parity sector as consistent after each write operation. A more palatable solution is to
maintain a most recently used pool that keeps track of a fixed number of inconsistent parity sectors
on stable storage. By keeping a copy of the pool in main memory, one can avoid accessing stable
storage to mark parity sectors that are already marked as inconsistent. By varying the size of the
pool, one can tradeoff the hit-rate of the pool against the amount of parity information that needs to
be regenerated when recovering from a system crash.
Chen, Lee, Gibson, Katz, Patterson 30
The above method should work efficiently for requests that exhibit good locality of reference.
If the disk array must service a large number of random write requests, as in transaction processing
environments, we recommend incorporating a group commit mechanism so that a large
number of parity sectors can be marked inconsistent with a single access to stable storage. This
solves the throughput problem but results in higher latencies for random write requests since the
parity sectors must be marked inconsistent before the writes can proceed.
3.5.3 Operating with a Failed Disk
A system crash in a block-interleaved redundant disk array is similar to a disk failure in that it
can result in the loss of parity information. This means that a disk array operating with a failed disk
can potentially lose data in the event of a system crash. Because system crashes are significantly
more common in most systems than disk failures, operating with a failed disk can be risky.
While operating with a failed disk, some form of logging must be performed on every write
operation to prevent the loss of information in the event of a system crash. We describe here two
elegant methods to perform this logging. The first method, called demand reconstruction, is the
easiest and most efficient but requires stand-by spare disks. With demand reconstruction, accesses
to a parity stripe with an invalid sector immediately trigger reconstruction of the appropriate data
onto a spare disk. Write operations thus never deal with invalid sectors created by disk failures. A
background process scans the entire disk array to ensure that all the contents of the failed disk is
eventually reconstructed within an acceptable time period.
The second method, called parity sparing [Reddy91], can be applied to systems without
stand-by spares but requires additional meta state information. Before servicing a write request
that would access a parity stripe with an invalid sector, the invalid sector is reconstructed and relocated
to overwrite its corresponding parity sector. The sector is then marked as relocated. Since the
corresponding parity stripe no longer has parity, a system crash can only affect the data being written.
When the failed disk is eventually replaced, the relocated sector is copied to the spare disk, the
parity is regenerated and the sector is no longer marked as relocated.
Chen, Lee, Gibson, Katz, Patterson 31
3.5.4 Orthogonal RAID
To this point in the paper, we have ignored the issue of how to connect disks to the host computer.
In fact, how one does this can drastically affect performance and reliability. Most computers
connect multiple disks via some smaller number of strings. A string failure thus causes multiple,
simultaneous disk failures. If not properly designed, these multiple failures can cause data to
For example, consider the 16-disk array in Figure 7 and two options of how to organize multiple,
error-correction groups. Option 1 combines each string of four disks into a single error-cor-
Figure 7: Orthogonal RAID. This figure present two options of how to organize errorcorrection
groups in the presence of shared resources, such as a string controller. Option 1 groups
four disks on the same string into an error-correction group; Option 2 groups one disk from each
string into a group. Option 2 is preferred over Option 1 because the failure of a string controller
will only render one disk from each group inaccessible.
Chen, Lee, Gibson, Katz, Patterson 32
rection group. Option 2 combines one disk on each string into a single error-correction group.
Unfortunately for Option 1, if a string fails, all four disks of an error-correction group are inaccessible.
Option 2, on the other hand, loses one disk from each of the four error-correction groups and
still allows access to all data. This technique of organizing error-correction groups orthogonally to
common hardware (such as a string) is called orthogonal RAID [Schulze89, Ng94]. Orthogonal
RAID has the added benefit of minimizing string conflicts when multiple disks from a group transfer
4 ADVANCED TOPICS
This section discusses advanced topics in the design of redundant disk arrays. Many of the
techniques are independent of each other, allowing designers to mix-and-match techniques.
4.1 Improving Small Write Performance for RAID Level 5
The major performance problem with RAID level 5 disk arrays is the high overhead for small
writes. As described in Section 3.2, each small write generates four separate disk I/Os, two to read
the old data and old parity, and two to write the new data and new parity. This increases the
response time of writes by approximately a factor of two and decreases throughput by approximately
a factor of four. In contrast, mirrored disk arrays, which generate only two disk I/Os per
small write, experience very little increase in response time and only a factor of two decrease in
throughput. These performance penalties of RAID level 5 relative to non-redundant and mirrored
disk arrays are prohibitive in applications such as transaction processing that generate many small
This section describes three techniques for improving the performance of small writes in
RAID level 5 disk arrays: buffering and caching, floating parity, and parity logging.
Chen, Lee, Gibson, Katz, Patterson 33
4.1.1 Buffering and Caching
Buffering and caching, two optimizations commonly used in I/O systems, can be particularly
effective in disk arrays. This section describes how these optimizations can work to minimize the
performance degradations of small writes in a RAID level 5.
Write buffering, also called asynchronous writes, acknowledges a user’s write before the
write goes to disk. This technique reduces the response time seen by the user under low and moderate
load. Since the response time no longer depends on the disk system, RAID level 5 can deliver
the same response time as any other disk system. If system crashes are a significant problem, nonvolatile
memory is necessary to prevent loss of data that are buffered but not yet committed. This
technique may also improve throughput in two ways: 1) by giving future updates the opportunity
to overwrite previous updates, thus eliminating the need to write the first update [Menon93a], and
2) by lengthening the queue of requests seen by a disk scheduler and allowing more efficient
Barring these overwrites, however, this technique does nothing to improve throughput. So
under high load, the write buffer space will fill more quickly than it empties and response time of a
RAID level 5 will still be four times worse than a RAID level 0.
An extension of write buffering is to group sequential writes together. This technique can
make writes to all types of disk systems faster, but it has a particular appeal to RAID level 5 disk
arrays. By writing larger units, small writes can be turned into full stripe writes, thus eliminating
altogether the Achilles heel of RAID level 5 workloads [Rosenblum91, Menon93a].
Read caching is normally used in disk systems to improve the response time and throughput
when reading data. In a RAID level 5 disk array, however, it can serve a secondary purpose. If the
old data required for computing the new parity is in the cache, read caching reduces the number of
disk accesses required for small writes from four to three. This is very likely, for example, in transaction
processing systems where records are frequently updated by reading the old value, changing
it and writing back the new value to the same location.
Chen, Lee, Gibson, Katz, Patterson 34
By also caching recently written parity, the read of the old parity can sometimes be eliminated,
further reducing the number of disk accesses for small writes from three to two. Because
parity is computed over many logically-consecutive disk sectors, the caching of parity exploits
both temporal and spatial locality. This is in contrast to the caching of data which, for the purposes
of reducing disk operations on small writes, relies on the assumption that recently read sectors are
likely to be written rather than on the principle of spatial locality. Of course, caching parity blocks
reduces the space available for caching data, which may increase the number of data misses.
4.1.2 Floating Parity
Menon and Kasson proposed a variation on the organization of parity in RAID level 5 disk
array, called floating parity, that shortens the read-modify-write of parity updated by small, random
writes to little more than a single disk access time on average [Menon93b]. Floating parity
clusters parity into cylinders, each containing a track of free blocks. Whenever a parity block
needs to be updated, the new parity block can be written on the rotationally-nearest unallocated
block following the old parity block. Menon and Kasson show that for disks with 16 tracks per cylinder,
the nearest unallocated block immediately follows the parity block being read 65% of the
time, and the average number of blocks that must be skipped to get to the nearest unallocated block
is small, between 0.7 and 0.8. Thus, the writing of the new parity block can usually occur immediately
after the old parity block is read, making the entire read-modify-write access only about a
millisecond longer than a read access.
To efficiently implement floating parity, directories for the locations of unallocated blocks
and parity blocks must be stored in primary memory. These tables are about 1 MB in size for each
disk array containing four to ten, 500 MB disks. To exploit unallocated blocks immediately following
the parity data being read, the data must be modified and a disk head switched to the track
containing the unallocated block before the disk rotates though an inter-sector gap. Because of
these constraints, and because only a disk controller can have exact knowledge of it’s geometry,
floating parity is most likely to be implemented in the disk controller.
Chen, Lee, Gibson, Katz, Patterson 35
Menon and Kasson also propose floating data as well as parity. This makes the overhead for
small writes in RAID level 5 disk arrays comparable to mirroring. The main disadvantage of floating
data is that logically sequential data may end up discontiguous on disk. Floating data also
requires much more free disk space than floating only the parity since there are many more data
blocks than parity blocks.
4.1.3 Parity Logging
Stodolsky and Gibson propose an approach called parity logging to reduce the penalty of
small writes in RAID level 5 disk arrays [Stodolsky93, Bhide92]. Parity logging reduces the overhead
for small writes by delaying the read of the old parity and the write of the new parity. Instead
of immediately updating the parity, an update image, which is the difference between the old and
new parity, is temporarily written to a log. Delaying the update allows the parity to be grouped
together in large contiguous blocks that can be updated more efficiently.
This delay takes place in two parts. First, the parity update image is stored temporarily in
non-volatile memory. When this memory, which could be a few tens of KB, fills up, the parity
update image is written to a log region on disk. When the log fills up, the parity update image is
read into memory and added to the old parity. The resulting new parity is then written to disk.
Although this scheme transfers more data to and from disk, the transfers are in much larger units
and are hence more efficient; large sequential disk accesses are an order of magnitude more efficient
than small random accesses (Section 2.1). Parity logging reduces the small write overhead
from four disk accesses to a little more than two disk accesses, the same overhead incurred by mirrored
disk arrays. The costs of parity logging are the memory used for temporarily storing update
images, the extra disk space used for the log of update images, and the additional memory used
when applying the parity update image to the old parity. This technique can also be applied to the
second copy of data in mirrored disk arrays to reduce the cost of writes in mirrored disk arrays
from two to a little more than one disk access [Orji93].
Chen, Lee, Gibson, Katz, Patterson 36
4.2 Declustered Parity
Many applications, notably database and transaction processing, require both high throughput
and high data availability from their storage systems. The most demanding of these applications
requires continuous operation—the ability to satisfy requests for data in the presence of disk failures
while simultaneously reconstructing the contents of failed disks onto replacement disks. It is
unacceptable to fulfill this requirement with arbitrarily degraded performance, especially in longlived
real-time applications such as video service; customers are unlikely to tolerate movies played
at a slower speed or having their viewing terminated prematurely.
Unfortunately, disk failures cause large performance degradations in standard RAID level 5
disk arrays. In the worst case, a workload consisting entirely of small reads will double the effective
load at non-failed disks due to extra disk accesses needed to reconstruct data for reads to the
failed disk. The additional disk accesses needed to completely reconstruct the failed disk increase
the load even further.
In storage systems that stripe data across several RAIDs, the average increase in load is significantly
less than in RAIDs with one large parity group, but the RAID with the failed disk still
experiences a 100% increase in load in the worst case. The failed RAID creates a hot spot that
degrades the performance of the entire system. The basic problem in these large systems is that
although inter-RAID striping distributes load uniformly when no disk is failed, it non-uniformly
distributes the increased load that results from a failed disk; the small set of disks in the same parity
group as the failed disk bear the entire weight of the increased load. The declustered parity
RAID organization solves this problem by uniformly distributing the increased load over all disks
[Muntz90, Merchant92, Holland92, Holland93, Ng92].
Figure 8 illustrates examples of standard and declustered parity RAIDs for systems with an
array size of eight disks and a parity group size of four. In this case, a multiple RAID system is
constructed by striping data over two RAIDs of four disks each with non-overlapping parity
groups. The declustered parity RAID is constructed by overlapping parity groups. If Disk 2 fails,
each read to Disk 2 in the standard, multiple RAID generates a single disk access to Disks 0, 1 and
Chen, Lee, Gibson, Katz, Patterson 37
3 and no disk access to Disks 4, 5, 6 and 7. In the declustered parity RAID, a random read to Disk
2 generates an access to Disks 4, 5, and 7 one-quarter of the time; to Disks 0, 1 and 3 half of the
time; and to disk 6 three-quarters of the time. Although the increased load is not uniform, it is
more balanced than in the standard RAID. Slightly more complex declustered parity RAIDs exist
that uniformly distribute the load such that each read to disk 2 generates an average of 3/7 disk
accesses to all non-failed disks.
The simplest way to create a declustered parity RAID that uniformly distributes load is to create
a set of parity groups including every possible mapping of parity group members to disks. In
our example, this would result in distinct mappings of parity groups to disks. For nearly
all practical array and parity group sizes, declustered parity RAID organizations are possible that
Standard, Multiple RAID
Declustered Parity RAID
Disk 1 Disk 2 Disk 3 Disk 4 Disk 5 Disk 6 Disk 7
Disk 0 Disk 1 Disk 2 Disk 3 Disk 4 Disk 5 Disk 6 Disk 7
Figure 8: Standard Versus Declustered Parity RAID. This figure illustrates examples of
standard and declustered parity RAID with eight disks and a parity group size of four. Identically
labeled blocks belong to the same parity group. In the standard RAID organization, parity groups
are composed of disks from one of two non-overlapping subsets of disks. In the declustered parity
RAID, parity groups span many overlapping subsets of disks.
Chen, Lee, Gibson, Katz, Patterson 38
uniformly distribute reconstruction load with much fewer than the combinatorial number of parity
groups. Such organizations can be devised using the theory of balanced incomplete block designs
[Hall86]. In practice, the load does not need to be absolutely balanced and a close approximation is
To summarize, a declustered parity RAID is often preferable to a standard, multiple RAID
because it uniformly distributes load during both the normal and failed modes of operation. This
allows a more graceful degradation in performance when a disk fails and allows the failed disk to
be reconstructed more quickly since all disks in the disk array can participate in its reconstruction.
In addition, unlike the example in Figure 8, the disk array size in a declustered parity RAID does
not have to be a multiple of the parity group size. Any combination of array and parity group sizes
such that the array size is greater than the parity group size is feasible. Declustered parity RAID
has two main disadvantages. First, it can be somewhat less reliable than standard, multiple RAID;
any two disk failures will result in data loss since each pair of disks has a parity group in common.
In a standard, multiple RAID, the parity groups are disjoint, so it is possible to have more than one
disk failure without losing data as long as each failure is in a different parity group. Second, the
more complex parity groups could disrupt the sequential placement of data across the disks. Large
requests are thus more likely to encounter disk contention in declustered parity RAID than in standard
multiple RAID. In practice, it is difficult to construct workloads where this effect is significant.
4.3 Exploiting On-Line Spare Disks
On-line spare disks allow reconstruction of failed disks to start immediately, reducing the
window of vulnerability during which an additional disk failure would result in data loss. Unfortunately,
they are idle most of time and do not contribute to the normal operation of the system. This
section describes two techniques, distributed sparing and parity sparing, that exploit on-line spare
disks to enhance performance during the normal operation of the system.
As Figure 9 illustrates, distributed sparing distributes the capacity of a spare disk across all
the disks in the disk array [Menon91]. The distribution of spare capacity is similar to the distribuChen,
Lee, Gibson, Katz, Patterson 39
tion of parity in RAID level 5 disk arrays. Instead of N data and one spare disk, distributed sparing
uses N+1 data disks that each have 1/(N+1)th spare capacity. When a disk fails, the blocks on the
failed disk are reconstructed onto the corresponding spare blocks. Distributed sparing obviates
dedicated spare disks, allowing all disks to participate in servicing requests, and thereby improving
performance during the normal operation of the disk array. Additionally, because each disk is partially
empty, each disk failure requires less work to reconstruct the contents of the failed disk. Distributed
sparing has a few disadvantages. First, the reconstructed data must eventually be copied
onto a permanent replacement for the failed disk. This creates extra work for the disk array, but,
since the copying can be done leisurely, it does not significantly affect performance. Second,
because the reconstructed data is distributed across many disk whereas it was formerly on a single
disk, reconstruction disturbs the original data placement, which can be a concern for some I/Ointensive
applications. In disk arrays with dedicated spares, the data placement after reconstruction
is identical to the data placement before reconstruction.
Parity sparing is similar to distributed sparing except that it uses the spare capacity to store
parity information [Reddy91, Chandy93]. As with distributed sparing, this eliminates dedicated
spare disks, improving performance during normal operation. The second set of parity blocks can
be used in a variety of ways. First, they can be used to logically partition the disk array into two
separate disk arrays, resulting in higher reliability. In Figure 10, for example, P0a might compute
the parity over blocks 1 and 2 while P0b computes the parity over blocks 3 and 4. Second, the
additional parity blocks can be used to augment the original parity groups. In Figure 10, if one
1 2 3
7 S1 6
S2 9 10
Figure 9: Distributed Sparing. Distributed sparing distributes the capacity of the spare disk
throughput the array. This allows all disks, including the disk that would otherwise have been a
dedicated spare, to service requests. This figure illustrates a RAID level 5 disk array with
distributed sparing. The ‘P’s denote parity blocks and ‘S’s denote spare blocks.
Chen, Lee, Gibson, Katz, Patterson 40
assumes that the parity of blocks 1, 2, 3, 4, P0a and P0b is always zero, write operations need
update only one of P0a or P0b. This has the benefit of improving small write performance by
allowing each small write to choose the parity block it will update based on information such as
the queue length and disk arm position at the two alternative disks. Third, the extra parity blocks
can be used to implement P+Q redundancy. When a disk fails, the disk array converts to simple
parity. By logical extension, a second disk failure would result in a RAID level 0 disk array.
Both distributed sparing and parity sparing offer interesting ways to exploit on-line spares for
improved performance. They are most effective for disk arrays with a small number of disks where
the fraction of spare disks to non-spare disks is likely to be large. As disk arrays become larger, a
smaller fraction of spare disks is needed to achieve the same level of reliability [Gibson91].
4.4 Data Striping in Disk Arrays
Distributing data across the disk array speeds up I/Os by allowing a single I/O to transfer data
in parallel from multiple disks or by allowing multiple I/Os to occur in parallel. The disk array
designer must keep in mind several tradeoffs when deciding how to distribute data over the disks
in the disk array to maximize performance, balancing two conflicting goals:
• Maximize the amount of useful data that each disk transfers with each logical I/O. Typically, a
disk must spend some time seeking and rotating between each logical I/O that it services. This
positioning time represents wasted work—no data is transferred during this time. It is hence
beneficial to maximize the amount of useful work done in between these positioning times.
1 2 3
7 P1b 6
P2a 9 10
Figure 10: Parity Sparing. Parity sparing is similar to distributed sparing except that the spare
space is used to store a second set of parity information.
Chen, Lee, Gibson, Katz, Patterson 41
• Utilize all disks. Idle times are similar to positioning times in that during idle times, no useful
work is done. Idle times can arise in two different situations. First, hot spots can exist, where
certain disks (the hot disks) are more heavily used than other disks (the cold disks) [Friedman83,
Wilmot89]. Second, it is possible that all disks could be used evenly when viewed over
a long period of time but not evenly at every instant. For example, if there is only one request to
the disk array and that request only uses one disk, then all other disks will remain idle.
These goals are in conflict because the schemes that guarantee use of all disks spread data
widely among more disks and hence cause each disk to transfer less data per logical I/O. On the
other hand, schemes that maximize the amount of data transferred per logical I/O may leave some
disks idle. Finding the right balance between these two goals is the main tradeoff in deciding how
to distribute data among multiple disks and is heavily workload dependent.
Data striping, or interleaving, is the most common way to distribute data among multiple
disks. In this scheme, logically contiguous pieces of data are stored on each disk in turn. We refer
to the size of each piece of data as the striping unit. The main design parameter in data striping is
the size of this striping unit. Smaller striping units cause logical data to be spread over more disks;
larger striping units cause logical data to be grouped, or clustered, together on fewer disks. Consequently,
the size of the striping unit determines how many disks each logical I/O uses.
Because the interaction between workload and striping unit can have a substantial effect on
the performance of a disk array with block-interleaved striping, Chen and Patterson developed
rules of thumb for selecting a striping unit [Chen90b]. Their simulation-based model evaluated a
spindle-synchronized disk array of 16 disks. The stochastic workload applied to the disk array had
two main parameters: average request size (varied from 4-1500 KB) and the number of concurrent,
independent logical requests (varied from 1-20). Their goal was to find the size of a striping unit
that gave the largest throughput for an incompletely specified workload. They found that the most
important workload parameter was concurrency. When the concurrency of the workload was
known, a simple formula specified a striping unit that provided 95% of the maximum throughput
possible for any particular request distribution:
Chen, Lee, Gibson, Katz, Patterson 42
1 sector + 1/4 * average positioning time * data transfer rate * (concurrency-1)
where the average positioning time is the disk’s average seek time for the workload plus an average
rotational delay. A striping unit selected by this expression is small when the concurrency is
low so that every access can utilize all disks, and larger when the concurrency is high so that more
different accesses can be serviced in parallel. Intuitively, the product of average positioning time
and data transfer rate balances the benefits and the costs of striping data. The benefit of striping is
the decreased transfer time of a single request, which saves approximately the transfer time of a
stripe unit. The cost of striping is the increased disk utilization that arises from an additional disk
positioning itself to access the data. The constant, 1/4, is sensitive to the number of disks in the
If nothing is known about a workload’s concurrency, Chen and Patterson found that a good
compromise size for a striping unit is
2/3 * average positioning time * data transfer rate
The constant, 2/3, is sensitive to the number of disks in the array; research needs to be done quantifying
Lee and Katz [Lee91a] use an analytic model of non-redundant disk arrays to derive an equation
for the optimal size of data striping. The disk array system they model is similar to that used
by Chen and Patterson [Chen90b] described above. They show that the optimal size of data striping
is equal to where P is the average disk positioning time, X is the average disk
transfer rate, L is the concurrency, Z is the request size, and N is the array size in disks. Their
results agree closely with those of Chen and Patterson. In particular, note that their equation also
predicts that the optimal size of data striping is dependent only the relative rates at which a disk
positions and transfers data, PX, rather than P or X individually. Lee and Katz show that the optimal
striping unit depends on request size; Chen and Patterson show that this dependency can be
ignored without significantly affecting performance.
PX(L - 1)Z
Chen, Lee, Gibson, Katz, Patterson 43
Chen and Lee [Chen93] conducted a follow-up study to [Chen90b] to determine the striping
unit for RAID Level 5 disk arrays. Reads in a RAID Level 5 are similar to reads (and writes) in a
RAID Level 0, causing the optimal striping unit for a read-intensive workload in a RAID Level 5
to be identical to the optimal striping unit in a RAID Level 0. For write-intensive workloads, however,
the overhead of maintaining parity causes full-stripe writes (writes that span the entire parity
group) to be more efficient than read-modify writes or reconstruct writes (writes that do not span
an entire parity group). This additional factor causes the optimal striping unit for RAID Level 5 to
be smaller for write-intensive workloads than the striping unit for RAID Level 0 by a factor of 4
for a 16-disk array. They also explored the relationship between the optimal striping unit and the
number of disks and found that the optimal striping unit for reads varies inversely to the number of
disks, but that the optimal striping unit for writes varies with the number of disks. Overall, they
found that the optimal striping unit for workloads with an unspecified mix of reads and writes was
independent of the number of disks and recommended (in the absence of specific workload information)
that the striping unit for RAID Level 5 disk arrays with any number of disks be set to
1/2 * average positioning time * data transfer rate
Researchers are currently investigating ways to distribute data other than a simple roundrobin
scheme. Some variations are choosing a different striping unit for each file and distributing
data by hashing or heat-balancing [Weikum92, Scheuermann91, Copeland88].
4.5 Performance and Reliability Modeling
This section presents a brief summary of work that has been done in modeling the performance
and reliability of disk arrays. General performance models for block-interleaved disk arrays
are very difficult to formulate due to the presence of queueing and fork-join synchronization. That
is, a disk array request consists of multiple component disk requests that must be queued and serviced
independently, then joined together to satisfy the disk array request. Currently, exact solutions
exist for certain two server fork-join queues, however, the general k server fork-join queue is
an open research problem. In addition, the bursty nature of most real I/O workloads is difficult to
model using existing performance models, which generally deal only with the steady state behavChen,
Lee, Gibson, Katz, Patterson 44
ior of the system. Thus, most performance models of block-interleaved disk arrays place heavy
restrictions on the configuration of the disk array or the types of workloads that can be modeled.
So far, a satisfactory performance model for RAID level 5 disk arrays that models both reads and
writes over a wide range of system and workload parameters has yet to be formulated.
Kim [Kim86] derives response time equations for synchronous byte-interleaved disk arrays
by treating the entire disk array as an M/G/1 queueing system. That is, the entire disk array is modeled
as an open queueing system with an exponential interarrival distribution, general service time
distribution, and a single server consisting of all the disks in the disk array. The study compares the
performance of an n disk synchronous byte-interleaved disk array with n independent disk with
uniform load and n independent disks with skewed load. She concludes that byte interleaving
results in reduced transfer time due to increased parallelism in servicing requests and better load
balancing but dramatically reduces the number of requests that can be serviced concurrently.
Kim and Tantawi [Kim91], derive approximate service time equations for asynchronous
(disks rotate independently of one another), byte-interleaved disk arrays. Disk seeks are assumed
to be distributed exponentially and rotational latencies are assumed to be distributed uniformly.
The results of the analytic equations are compared with the results of both synthetic and tracedriven
simulations. An important conclusion of the paper is that for a wide range of seek time distributions,
the sum of the seek and rotational latency can be approximated by a normal distribution.
Chen and Towsley [Chen91] analytically model RAID level 1 and RAID level 5 disk arrays
for the purpose of comparing their performance under workloads consisting of very small and
large requests. Bounds are used to approximately model the queueing and fork-join synchronization
in RAID level 1 disk arrays. Small write requests in RAID level 5 disk arrays are handled by
ignoring the fork-join synchronization overhead, resulting in a somewhat optimistic model. Large
requests are modeled by using a single queue for all the disks in the disk array. The results of the
model are compared against simulation.
Lee and Katz [Lee93, Lee91a] derive approximate throughput and response time equations
for block-interleaved disk arrays. Their model is the first analytic performance model for general
Chen, Lee, Gibson, Katz, Patterson 45
block-interleaved disk arrays that takes into account both queueing and fork-join synchronization.
Previous models have ignored either the queuing or fork-join synchronization component of the
system. Lee and Katz[Lee91a] also provide a simple application of the analytic model to determine
an equation for the optimal unit of data striping in disk arrays.
In addition to analytic models specifically for disk arrays, work dealing with the modeling of
fork-join queueing systems in general [Baccelli85, Flatto84, Heidelberger82, Nelson88] is useful
in modeling disk arrays. Most of these papers, however, model highly restrictive systems that are
not easily applied to disk arrays.
The reliability of disk arrays is most frequently modeled using continuous time Markov
chains. The failure and recovery of components in the system cause transitions from one state to
another. Generally, the most useful information derived from such models is the average time to
system failure and the equilibrium state probabilities from which one can determine the fraction of
failures caused by each type of failure mode. A disadvantage of Markov reliability models is that
the number of states necessary to model even simple disk arrays increases exponentially as new
failure modes and system components are introduced. Fortunately, because the repair/replacement
rates for components of most disk arrays are much higher than the failure rates, it is usually possible
to greatly simply the Markov models by eliminating states that very rarely occur. To date, Gibson
[Gibson91] presents the most complete reliability study of disk arrays.
5 CASE STUDIES
Since the first publication of the RAID taxonomy in 1987, the disk drive industry has been
galvanized by the RAID concept. At least one market survey, prepared by Montgomery Securities
in 1991 [Mon91], (optimistically) predicted that the disk array market would reach $7.8 billion by
1994. Companies either shipping or having announced disk array products include: Array Technology
Corporation (a subsidiary of Tandem), Ciprico, Compaq, Data General, Dell, EMC Corporation,
Hewlett-Packard, IBM, MasPar, Maximum Strategies, Microtechnologies Corporation,
Micropolis, NCR, StorageTek, and Thinking Machines. RAID technology has found application in
Chen, Lee, Gibson, Katz, Patterson 46
all major computer system segments, including supercomputing, mainframes, minicomputers,
workstation file servers, and PC file servers. We highlight some of these systems in the following
5.1 Thinking Machines Corporation ScaleArray
The TMC ScaleArray is a RAID level 3 for the CM-5, which is a massively parallel processor
(MPP) from Thinking Machines Corporation (TMC). Announced in 1992, this disk array is
designed for scientific applications characterized by high-bandwidth for large files. Thinking
Machines also provides a file system that can deliver data from a single file to multiple processors
from multiple disks [LoVerso93].
The base unit consists of eight IBM Model 0663E15 disks. These 3.5 inch disks contain 1.2
GB of data and can transfer up to 2 MB/second for reads and 1.8 MB/second for writes. A pair of
disks is attached to each of four SCSI-2 strings, and these four strings are attached to an 8 MB disk
buffer. Three of these base units are attached to the backplane, so the minimum configuration is 24
disks. TMC expects the 24 disks to be allocated as 22 data disks, 1 parity disk, and one spare, but
these ratios are adjustable.
Perhaps the most interesting feature of the ScaleArray is that these base units are connected
directly to the data routing network of the CM-5. Massively-parallel processors normally reserve
that network to send messages between processors, but TMC decided to use the same network to
give them a scalable amount of disk I/O in addition to a scalable amount of processing. Each network
link offers 20 MB/second, and there is a network link for each base unit. As a consequence of
communicating with the data network and the small message size of the CM-5, the interleaving
factor is only 16 bytes. Parity is calculated by an on-board processor and sent to the appropriate
Using the scalable MPP network to connect disks means there is almost no practical limit to
the number of disks that can be attached to the CM-5, since the machine was designed to be able to
scale to over 16,000 nodes. At the time of announcement, TMC had tested systems with 120 disks.
Chen, Lee, Gibson, Katz, Patterson 47
Using their file system and 120 disks (including a single parity disk), TMC was able to demonstrate
up to 185 MB/second for reads and up to 135 MB/second for writes for 240 MB files. In
another test, TMC demonstrated 1.5 to 1.6 MB/second per disk for reads and 1.0 to 1.1 MB/second
per disk for writes as the number of disks scaled from 20 to 120. For this test, TMC sent 2 MB to
each disk from a large file.
5.2 StorageTek Iceberg 9200 Disk Array Subsystem
StorageTek undertook the development of disk array-based mainframe storage products in the
late 1980s. Their array, called Iceberg, is based on collections of 5.25” disk drives yet appears to
the mainframe (and its IBM-written operating system) as more traditional IBM 3380 and 3390
disk drives. Iceberg implements an extended RAID level 5 and 6 disk array. An array consists of
13 data drives, P and Q drives, and a hot spare. Data, parity, and Reed-Solomon coding are striped
across the 15 active drives within the array. A single Iceberg controller can manage up to four such
arrays, totalling 150 GB of storage.
Iceberg incorporates a number of innovative capabilities within its array controller, called
Penguin. The controller itself is organized as an 8 processor system and executes its own real-time
operating system. The controller can simultaneously execute eight channel programs and can independently
transfer on four additional channels.
The controller manages a large, battery-backed semiconductor cache (from 64 MB up to 512
MB) in front of the disk array. This “extra level of indirection” makes possible several array optimizations.
First, the cache is used as a staging area for compressing and decompressing data to and
from disk. This compression can double the effective storage capacity of the disk array. Second,
when written data is replaced in the cache, it is not written back to the same place on disk. In a
manner much like Berkeley’s Log Structured File System [Rosenblum91], data is written opportunistically
to disk in large track-sized transfer units, reducing random access latencies and performing
adaptive load balancing. And third, the cache makes it possible to translate between the
variable-length sectors used by most IBM mainframe applications and the fixed-size sectors of
commodity small disk drives. StorageTek calls this process dynamic mapping. The controller
Chen, Lee, Gibson, Katz, Patterson 48
keeps track of free space within the array and must reclaim space that is no longer being used. The
free space data structures and track tables mapping between logical IBM 3380 and 3390 disks and
the actual physical blocks within the array is maintained in a separate, 8 MB, non-volatile controller
Due to the complexity of the software for a system as ambitious as Iceberg, the product is
over a year behind schedule, though at the time of this writing it is in beta test.
5.3 NCR 6298
The NCR 6298 Disk Array Subsystem, released in 1992, is a low cost RAID subsystem supporting
RAID levels 0, 1, 3 and 5. Designed for commercial environments, the system supports up
to four controllers, redundant power supplies and fans, and up to 20 3.5” SCSI-2 drives. All components—
power supplies, drives, and controllers—can be replaced while the system services
requests. Though the system does not allow on-line spares, built-in diagnostics notify the host
when a drive has failed, and reconstruction occurs automatically when a replacement drive is
The array controller architecture features a unique lock-step design (Figure 11) that requires
almost no buffering. For all requests except RAID level 5 writes, data flows directly through the
controller to the drives. The controller duplexes the data stream for mirroring configurations and
generates parity for RAID level 3 synchronously with data transfer. On RAID level 3 reads, the
system can optionally read the parity along with the data, proving an additional check of data
integrity. This lock-step nature also means that RAID level 3 performance does not degrade when
a single drive fails.
The RAID level 5 implementation does not support full-stripe writes. Instead, the write path
uses an intermediate SRAM buffer. When a write occurs, the old data and parity are read (in lockstep)
from disk, exclusive-or’ed together, and stored into a 64K SRAM parity buffer. As a side
effect of data transfer from the host, the contents of the parity buffer are exclusive-or’ed with the
data to generate the up-to-date parity and the parity is written to the parity drive. While this design
Chen, Lee, Gibson, Katz, Patterson 49
prohibits the overlap of data transfer for RAID level 5, the controller overlaps the drive positioning
operations. This parsimonious use of buffer, in contrast with architectures such as RAID-II, lowers
the cost of the controller.
The lock-step data path is also used for reconstruction. Data and parity are read synchronously
from the surviving drives, exclusive-or’ed together, and written to the replacement drive.
Reconstruction is therefore quite fast, approaching the minimum time of writing a single drive.
The host interface is fast, wide, differential SCSI-2 (20 MB/S), while the drive channels are
fast, narrow SCSI-2 (10 MB/S). Because of the lock-step architecture, transfer bandwidth to the
host is limited to 10 MB/S for RAID level 0, 1 and 5. However, in RAID level 3 configurations,
Figure 11: NCR 6298 Controller Datapath. The lock-step datapath of the 6298 requires no
memory for any operations except RAID level 5 writes. By placing the XOR and MUX directly
in the data path, the controller can generate parity or reconstruct data on the fly.
Chen, Lee, Gibson, Katz, Patterson 50
performance on large transfers has been measured at over 14 MB/S (limited by the host’s memory
TickerTAIP/DataMesh is a research project at Hewlett-Packard Labs whose goal is to develop
an array of “smart” disk nodes linked by a fast, reliable network [Cao93] (Figure 12). Each node
contains a disk, a CPU, and some local memory. Disk array controller operations such as parity
computation are distributed among these smart disk nodes, and the nodes communicate by message-
passing across the internal interconnect.
A unique feature of the TickerTAIP architecture is the close association of a CPU to each disk
drive in the array (Figure 12). This association allows each node to perform some of the processing
needed to perform a disk array operation. In addition, a subset of nodes are connected to the host
computers that are requesting data. Because more than one node can talk to the host computers,
TickerTAIP can survive a number of node failures. Many other disk arrays, in contrast, have only
one connection to host computers and hence cannot survive the failure of their disk array controller.
Currently, TickerTAIP exists as a small, 7-node prototype. Each node consists of a T800
transputer, 4 MB of local RAM, and one HP79560 SCSI disk drive. The TickerTAIP project is
internal interconnect TickerTAIP
Figure 12: The TickerTAIP/DataMesh Hardware Architecture. A unique feature of the
TickerTAIP architecture is the close association of a CPU to each disk drive in the array. This
association allows each node to perform some of the processing needed to perform a disk array
Chen, Lee, Gibson, Katz, Patterson 51
now developing software to make the multiple, distributed processing nodes appear as a single,
fast storage server. Early results show that, at least for computing parity, TickerTAIP achieves near
linear scaling [Cao93].
5.5 The RAID-II Storage Server
RAID-II (Figure 13) is a high-bandwidth, network file server designed and implemented at
the University of California at Berkeley as part of a project to study high-performance, largecapacity,
highly-reliable storage systems [Chen94, Drapeau94, Katz93]. RAID-II interfaces a
SCSI-based disk array to a HIPPI network. One of RAID-II’s unique features is its ability to provide
high-bandwidth access from the network to the disks without transferring data through the
relatively slow file server (a Sun4/280 workstation) memory system. To do this, the RAID project
designed a custom printed-circuit board called the XBUS card.
8 Port Interleaved
Memory (128 MByte)
8 x 8 x 32-bit
VMEVME VME VME
4 Port Interleaved
Memory (32 MB)
4-by-8 by 32-bit
VME VME VME VME
Ethernet (Control and Low Latency Transfers)
Four VME Disk Controllers
Figure 13: RAID-II Architecture. A high-bandwidth crossbar connects the network interface
(HIPPI), disk controllers, multiported memory system, and parity computation engine (XOR). An
internal control bus provides access to the crossbar ports, while external point-to-point VME links
provide control paths to the surrounding SCSI and HIPPI interface boards. Up to two VME disk
controllers can be attached to each of the four VME interfaces.
Chen, Lee, Gibson, Katz, Patterson 52
The XBUS card provides a high-bandwidth path between the major system components: the
HIPPI network, four VME busses that connect to VME disk controllers, and an interleaved, multiported
semiconductor memory. The XBUS card also contains a parity computation engine that
generates parity for writes and reconstruction on the disk array. The data path between these system
components is a 4 ´ 8 crossbar switch that can sustain approximately 160 MB/s. The entire
system is controlled by an external Sun 4/280 file server through a memory-mapped control register
interface. Figure 13 shows a block diagram for the controller.
To explore how the XBUS card enhances disk array performance, Chen, et al. [Chen94] compare
the performance of RAID-II to RAID-I (Table 7). RAID-I is basically RAID-II without the
XBUS card [Chervenak91]. They find that adding a custom interconnect board with a parity
engine improves performance by a factor of 8 to 15 over RAID-I. The maximum bandwidth of
RAID-II is between 20 and 30 MB/s, enough to support the full disk bandwidth of approximately
20 disk drives.
5.6 IBM Hagar Disk Array Controller
Hagar is a disk array controller prototype developed at the IBM Almaden Research Center
[Menon93a]. Hagar was designed for large capacity (up to 1 TB), high bandwidth (up to 100 MB/
Disk Array Read
Disk Array Write
RAID-I 2.4 MB/s 1.2 MB/s 50%
RAID-II 20.9 MB/s 18.2 MB/s 13%
RAID-II speedup 8.7 15.2
Table 7: Performance Comparison between RAID-II and RAID-I. This table compares the
performance of RAID-II to that of RAID-I. Because RAID-II has a special purpose parity engine, disk
array write performance is comparable to disk array read performance. All writes in this test are full-stripe
writes [Lee91b]. For RAID-II reads, data is read from the disk array into XBUS memory, then sent over
the HIPPI network back to XBUS memory. For RAID-I reads, data is read from the disk array into Sun4
memory, then copied again into Sun4 memory. This extra copy equalizes the number of memory accesses
per data word. For RAID-II writes, data starts in XBUS memory, is sent over HIPPI back into XBUS
memory, parity is computed, and the data and parity are written to the disk subsystem. For RAID-I writes,
data starts in Sun4 memory, gets copied to another location in Sun4 memory, then is written to disk.
Meanwhile, parity is computed on the Sun4 and later written to disk. RAID-I uses a 32 KB striping unit
with 8 disks (and is performance-limited by the Sun4’s VME bus); RAID-II uses a 64 KB striping unit
with 24 disks.
Chen, Lee, Gibson, Katz, Patterson 53
s), and high I/O rate (up to 5000 4-KB I/Os per second). In addition, Hagar provides high availability
through the use of redundant hardware components, multiple power boundaries, and on-line
reconstruction of data.
Two design features of Hagar are especially noteworthy. First, Hagar uses battery-backed
memory to allow user writes to provide safe, asynchronous writes (as discussed in Section 4.1.1).
The designers of Hagar require each write to be stored in two separate memory locations in two
different power regions to further increase reliability.
Second, Hagar incorporates a special-purpose parity computation engine inside the memory
of the controller. This is in contrast to the RAID-II architecture, which places the parity engine as a
port on the controller bus (Figure 13). The Hagar memory system supports a special store operation
that performs an exclusive-or on the current contents of a memory location with the new data,
then writes the result to that location. Incorporating the parity engine in the memory complicates
the memory system, but it reduces the data traffic on the controller’s internal data bus.
Hagar was never fully operational; however, IBM is working on future disk array products
that use ideas from Hagar.
6 OPPORTUNITIES FOR FUTURE RESEARCH
Redundant disk arrays have rejuvenated research into secondary storage systems over the past
five to seven years. As this survey highlights, much has been proposed and examined, but much is
left to do. This section discusses the classes of research not adequately understood with particular
attention to specific open problems.
6.1 Experience with Disk Arrays
As an over five year old research area that has sported products for at least six years, redundant
disk arrays have remarkably few published measurement results and experience. In addition
to validating models and techniques found in the literature, such experience reports can play an
Chen, Lee, Gibson, Katz, Patterson 54
important role in technology transfer [Buzen86]. Furthermore, measurements frequently form the
basis for developing new optimizations.
6.2 Interaction among New Organizations
As this survey describes, there are many new and different disk array organizations. Most of
these, including double failure correction, declustered parity, parity logging, floating parity, distributed
sparing, log-structured file systems, and file-specific data striping, have only been studied
in isolation. Unquestionably among these there will be significant interactions, both serious new
problems and obvious simplifications or optimizations.
As more is understood about the interactions among disk array technologies, designers and
managers of disk arrays will be faced with the task of configuring and tuning arrays. As Section
4.5 discusses, redundant disk array performance and reliability modelling is largely incomplete
and unsophisticated. Work needs to be done in the application of fundamental modelling to the
problem of disk arrays as well as the development of that fundamental modelling, fork-join queueing
models in particular. A good goal for of this work is graphical, interactive analysis tools
exploiting low overhead monitoring data to guide configuration and tuning.
One objection commonly lodged against redundant disk arrays, particularly some of the
newly proposed technologies, is their relatively high complexity. Storage systems are responsible
for more than just the availability of our data, they are responsible for its integrity. As the complexity
goes up, the opportunity for disastrous latent bugs also rises. This is compounded by the desire
to increase performance by continuing computation as soon as storage modifications are delivered
to storage server memory; that is, before these modifications are committed to disk. Inexpensive
and highly reliable mechanisms are needed to control the vulnerability to increased software complexity
of storage systems.
6.3 Scalability, Massively Parallel Computers, and Small Disks
One of the key motivations for redundant disk arrays is the opportunity to increase data parallelism
in order to satisfy the data processing needs of future generations of high-performance comChen,
Lee, Gibson, Katz, Patterson 55
puters. This means that arrays must scale up with the massively parallel computers that are being
built and the even more massively parallel computers being planned. Massively parallel disk
arrays introduce many problems: physical size, connectively, delivery-system bottlenecks, and
storage control processing requirements to name a few. The most compelling approach to ever
larger disk arrays is to embed storage based on the new generations of small diameter disks into
the fabric of massively parallel computers, use the computer’s interconnection network for data
distribution and redundancy maintenance, and distribute the storage control processing throughout
the processors of the parallel computer.
Though compelling, this approach has substantial problems to be overcome. Primary among
these are the impact on the interconnection network of distributing the redundancy computations
[Cao93], the impact on the processors of distributing storage control, and the viability of allocating
data on storage devices near the processors that will use it.
Redundant disk arrays are fundamentally designed for throughput, either high transfer rates
for large, parallel transfers or large numbers of concurrent small accesses. They are only effective
for reducing access latency when this latency is limited by throughput. For lower throughput
workloads, disk arrays enhance storage performance only slightly over traditional storage systems.
Caching is the main mechanism for reducing access latency, but caching can be ineffective
either because data is too large, too infrequently accessed, or too frequently migrated among
caches. For these workloads, data prefetching is essential. Research into aggressive prefetching
systems is beginning to examine opportunities to extract or predict future accesses and provide
mechanisms to efficiently utilize available resources in anticipation of these accesses [Korner90,
Kotz91, Gibson92, Patterson93, Tait91].
Chen, Lee, Gibson, Katz, Patterson 56
Disk arrays have moved from research ideas in the late 1980’s to commercial products today.
The advantages of using striping to improve performance and redundancy to improve reliability
have proven so compelling that most major computer manufacturers are selling or intending to sell
disk arrays. Much research and implementation have been accomplished, both in industry and universities,
but many theoretical and practical issues remain unresolved. We look forward to the
many more fruitful years of disk array research.
We thank Bill Courtright, Mark Holland, Jai Menon, and Daniel Stodolsky for reading an earlier
draft of this paper and for their many helpful comments. We are especially indebted to Bill
Courtright and Daniel Stodolsky for writing the section of this paper describing the NCR disk
9 ANNOTATED BIBLIOGRAPHY
[Amdahl67] Gene M. Amdahl. Validity of the single processor approach to achieving large scale
computing capabilities. In Proceedings AFIPS 1967 Spring Joint Computer
Conference, volume 30, pages 483–485, April 1967.
Three page paper that eloquently gives case for traditional computers by pointing out
that performance improvement is limited by portion of the computation that is not
[Baccelli85] Francois Baccelli. Two Parallel Queues Created by Arrivals with Two Demands.
Technical Report 426, INRIA–Rocquencourt France, 1985.
Derives an exact solution for the two-server, M/G/1 fork-join queue.
[Bhide92] Anupam Bhide and Daniel Dias. Raid Architectures for OLTP. Technical Report RC
17879 (#78489), IBM, March 1992.
Increases throughput for workloads emphasizing small, random write accesses in a
redundant disk array by logging changes to parity for efficient application later.
Parity changes are logged onto a separate disk which must be externally sorted
before application to the disk array’s parity.
Chen, Lee, Gibson, Katz, Patterson 57
[Bitton88] Dina Bitton and Jim Gray. Disk Shadowing. In Very Large Database Conference
XIV, pages 331–338, 1988.
Describes disk mirroring and derives an analytical equation for read and write seek
distances as a function of the number of data copies.
[Burkhard93] W. Burkhard and J. Menon. Disk Array Storage System Reliability. In 23rd Annual
International Symposium on Fault-Tolerant Computing, pages 432–441, June 1993.
Argues need for multiple-error-correcting disk arrays, discusses how to use maximal
distance separable codes to protect against multiple errors in a space-efficient
[Buzen86] Jeffrey P. Buzen and Annie W.C. Shum. I/O Architecture in MVS/370 and MVS/
XA. CMG Transactions, 54:19–26, Fall 1986.
Overview of the MVS/370 and MVS/XA I/O architecture. Describes channel paths,
storage directors, string controllers, rotational position sensing, static and dynamic
[Cao93] Pei Cao, Swee Boon Lim, Shivakumar Venkataraman, and John Wilkes. The
TickerTAIP parallel RAID architecture. In Proceedings of the 1993 International
Symposium on Computer Architecture, May 1993.
Describes the TickerTAIP architecture, software implementation issues, and the
performance of different methods of distributing parity computation among multiple
[Chandy93] John Chandy and A. L. Narasimha Reddy. Failure Evaluation of Disk Array
Organizations. In Proceedings of the International Conference on Distributed
Computing Systems, May 1993.
Contrasts four previously described schemes for minimizing data reconstruction
time in small (7 and 16 disks) redundant disk arrays: RAID 5 with a single spare disk,
RAID 5 with a single spare whose space is distributed across all disks, a special case
of Muntz and Lui’s parity clustering organization, and a method of dynamically
converting a redundant data disk to a spare disk by merging two redundancy groups
into one larger group. The second, distributed sparing, is generally preferred because
of its performance and simplicity, but the Muntz scheme is better for minimal impact
of user performance during recovery.
[Chen90a] Peter M. Chen, Garth Gibson, Randy H. Katz, and David A. Patterson. An
Evaluation of Redundant Arrays of Disks Using an Amdahl 5890. In Proceedings of
the 1990 ACM SIGMETRICS Conference on Measurement and Modeling of
Computer Systems, May 1990.
Chen, Lee, Gibson, Katz, Patterson 58
The first experimental evaluation of RAID. Compares RAID levels 0, 1, and 5.
[Chen90b] Peter M. Chen and David A. Patterson. Maximizing Performance in a Striped Disk
Array. In Proceedings of the 1990 International Symposium on Computer
Architecture, pages 322–331, May 1990.
Discusses how to choose the striping unit for a RAID level 0 disk array.
[Chen91] Shenze Chen and Don Towsley. A Queueing Analysis of RAID Architectures.
Technical Report COINS Tech. Report 91-71, University of Massachusetts,
Amherst, Department of Computer and Information Science, 1991.
Analytically models RAID level 1 and RAID level 5 disk arrays to compare their
performance on small and large requests. Bounds are used to model the queueing and
fork-join synchronization in RAID level 1 disk arrays. Small write requests in RAID
level 5 disk arrays are handled by ignoring the fork-join synchronization overhead.
Large requests are modeled by using a single queue for all the disks in the disk array.
[Chen93] Peter M. Chen and Edward K. Lee. Striping in a RAID Level 5 Disk Array.
Technical Report CSE-TR-181-93, University of Michigan, November 1993.
Discusses how to choose striping unit for RAID Level 5 disk arrays. Quantifies
effect of writes and varying number of disks.
[Chen94] Peter M. Chen, Edward K. Lee, Ann L. Drapeau, Ken Lutz, Ethan L. Miller,
Srinivasan Seshan, Ken Shirriff, David A. Patterson, and Randy H. Katz.
Performance and Design Evaluation of the RAID-II Storage Server. Invited to the
Journal of Distributed and Parallel Databases, to appear, 1994. also appeared in
The 1993 International Parallel Processing Symposium Workshop on I/O in Parallel
Summarizes major architectural features of RAID-II and evaluates how they impacts
[Chervenak91] Ann L. Chervenak and Randy H. Katz. Performance of a Disk Array Prototype. In
Proceedings of the 1991 ACM SIGMETRICS Conference on Measurement and
Modeling of Computer Systems, volume 19, pages 188–197, May 1991.
Performance Evaluation Review.
Evaluates the performance of RAID-I, a U.C. Berkeley disk array prototype.
[Copeland88] G. Copeland, W. Alexander, E. Boughter, and T. Keller. Data Placement in Bubba.
In Proceedings of the ACM SIGMOD International Conference on Management of
Data, pages 99–108, 1988.
Discusses data allocation in a large database.
Chen, Lee, Gibson, Katz, Patterson 59
[Drapeau94] Ann L. Drapeau, Ken Shirriff, Edward K. Lee, Peter M. Chen, Garth A. Gibson,
John H. Hartman, Ethan L. Miller, Srinivasan Seshan, Randy H. Katz, Ken Lutz,
and David A. Patterson. RAID-II: A High-Bandwidth Network File Server. In
Proceedings of the 1994 International Symposium on Computer Architecture, April
Describes the architecture, file system, and performance of RAID-II, a disk-array
file server prototype.
[Emlich89] Larry W. Emlich and Herman D. Polich. VAXsimPLUS, A Fault Manager
Implementation. Digital Technical Journal, 8, February 1989.
Describes Digital Equipment Corporation’s tool for predicting an avoiding disk
[Flatto84] L. Flatto and S. Hahn. Two Parallel Queues Created by Arrivals with Two Demands
I}. SIAM Journal of Computing, pages 1041–1053, October 1984.
Derives an exact solution for the two server, M/M/1, fork-join queue.
[Friedman83] Mark B. Friedman. DASD Access Patterns. In 14th International Conference on
Management and Performance Evaluation of Computer Systems, pages 51–61,
1983. CMG XIV.
Looks at how much disk accesses are skewed towards particular disks in several
transaction processing sites.
[Gibson91] Garth Alan Gibson. Redundant Disk Arrays: Reliable, Parallel Secondary Storage.
PhD thesis, University of California at Berkeley, December 1991. also available
from MIT Press, 1992.
Award winning dissertation that describes RAIDs in detail, with emphasis on
reliability analysis of several alternatives.
[Gibson92] Garth A. Gibson, R. Hugo Patterson, and M. Satyanarayanan. Disk Reads with
DRAM Latency. Third Workshop on Workstation Operating Systems, April 1992.
Proposes that applications give hints about their future file accesses so that the buffer
cache can prefetch needed data and provide low-latency file access. The hints could
also be exploited to improve cache management and disk scheduling.
[Gray90] Jim Gray, Bob Horst, and Mark Walker. Parity Striping of Disc Arrays: Low-Cost
Reliable Storage with Acceptable Throughput. In Proceedings of the 16th Very
Large Database Conference, pages 148–160, 1990. VLDB XVI.
Describes an data and parity layout for disk arrays called parity striping. Parity
striping is essentially RAID level 5 with an infinite striping unit and manual load
Chen, Lee, Gibson, Katz, Patterson 60
[Hall86] M. Hall. Combinatorial Theory (2nd Edition). Wiley-Interscience, 1986.
Textbook on combinatorial theory. The section on balanced, incomplete block
designs are most relevant for readers of this paper.
[Heidelberger82] Philip Heidelberger and Kishor S. Trivedi. Queueing Network Models for Parallel
Processing with Asynchronous Tasks. IEEE Transactions on Computers, C-
31(11):1099–1109, November 1982.
Derives approximate solutions for queueing systems with forks but no joins.
[Hennessy90] John L. Hennessy and David A. Patterson. Computer Architecture: A Quantitative
Approach. Morgan Kaufmann Publishers, Inc., 1990.
Likely the most popular general book in computer architecture today, the discussion
on technology trends, general I/O issues, and measurements of seek distances are
most relevant to readers of this paper.
[Holland92] Mark Holland and Garth Gibson. Parity Declustering for Continuous Operation in
Redundant Disk Arrays. In Proceedings of the 5th International Conference on
Architectural Support for Programming Languages and Operating Systems
(ASPLOS-V), pages 23–35, October 1992.
Describes parity declustering, a technique for improving the performance of a
redundant disk array in the presence of disk failure. Analyzes the proposed solution
using detailed simulation and finds significant improvements (20-50%) in both user
response time and reconstruction time. Also analyzes a set of previously-proposed
optimizations that can be applied to the reconstruction algorithm, concluding that
they can actually slow the reconstruction process under certain conditions.
[Holland93] Mark Holland, Garth Gibson, and Daniel Siewiorek. Fast, On-Line Failure Recovery
in Redundant Disk Arrays. In Proceedings of the 23rd International Symposium on
Fault Tolerant Computing, 1993. FTCC-23.
Compares and contrasts two data reconstruction algorithms for disk arrays: “parallel
stripe-oriented reconstruction” and “disk-oriented reconstruction”. Presents an
implementation of the disk-oriented algorithm and analyzes reconstruction
performance of these algorithms, concluding that the disk oriented algorithm is
superior. Investigates the sensitivity of the reconstruction process to the size of the
reconstruction unit and the amount of memory available for reconstruction.
[Hsiao90] H. Hsiao and D. DeWitt. Chained Declustering: A New Availability Strategy for
Multiprocessor Database Machines. In Proceedings of the 1990 IEEE International
Conference on Data Engineering, pages 456–465, February 1990.
Introduces a variation of mirroring, where the secondary copy of data is distributed
Chen, Lee, Gibson, Katz, Patterson 61
across the disks in a different manner than the primary copy of data.
[Katz92] Randy H. Katz. High Performance Network and Channel-Based Storage.
Proceedings of the IEEE, 80(8):1238–1261, August 1992.
Presents overview of network-based storage systems. Reviews hardware and
software trends in storage systems.
[Katz93] Randy H. Katz, Peter M. Chen, Ann L. Drapeau, Edward K. Lee, Ken Lutz,
Ethan L. Miller, Srinivasan Seshan, and David A. Patterson. RAID-II: Design and
Implementation of a Large Scale Disk Array Controller. In 1993 Symposium on
Integrated Systems, 1993. University of California at Berkeley UCB/CSD 92/705.
Describes the design decisions and implementation experiences from RAID-II.
[Kim86] Michelle Y. Kim. Synchronized Disk Interleaving. IEEE Transactions on
Computers, C-35(11):978–988, November 1986.
Simulates the performance of independent disks versus synchronized disk striping.
Derives an equation for response time by treating the synchronized disk array as an
M/G/1 queueing system.
[Kim91] Michelle Y. Kim and Asser N. Tantawi. Asynchronous Disk Interleaving:
Approximating Access Delays. IEEE Transactions on Computers, 40(7):801–810,
Derives an approximate equation for access time in unsynchronized disk arrays
when seeks times are exponentially distributed and rotational latency is uniformly
[Korner90] K. Korner. Intelligent Caching for Remote File Service. In Proceedings of the
International Conference on Distributed Computing Systems, pages 220–226, 1990.
Uses traces to generate hints based on the program running and the directory and
name of files accessed. The file server uses the hints to pick a caching algorithm:
LRU, MRU, none. Simulation showed significant benefits from intelligent caching
but not from read-ahead which delayed demand requests since it was not
[Kotz91] David Kotz and Carla Schlatter Ellis. Practical Prefetching Techniques for Parallel
File Systems. In Proceedings of the First International Conference on Parallel and
Distributed Information Systems, pages 182–189, December 1991.
File access predictors use past accesses to prefetch data in idle nodes of a parallel file
system. Simulation studies show that practical predictors can often significantly
reduce total execution time while the penalty for incorrect predictions is modest.
Chen, Lee, Gibson, Katz, Patterson 62
[Lee91a] Edward K. Lee and Randy H. Katz. An Analytic Performance Model of Disk Arrays
and its Applications. Technical Report UCB/CSD 91/660, University of California
at Berkeley, 1991.
Derives an analytic model for non-redundant disk arrays and uses the model to
derive an equation for the optimal size of data striping.
[Lee91b] Edward K. Lee and Randy H. Katz. Performance Consequences of Parity Placement
in Disk Arrays. In Proceedings of the 4rd International Conference on Architectural
Support for Programming Languages and Operating Systems (ASPLOS-IV), pages
190–199, April 1991.
Investigates the performance of different methods of distributing parity in RAID
level 5 disk arrays.
[Lee93] Edward K. Lee and Randy H. Katz. An Analytic Performance Model of Disk
Arrays. In Proceedings of the 1993 ACM SIGMETRICS Conference on
Measurement and Modeling of Computer Systems, pages 98–109, May 1993.
Similar to earlier technical report with similar name except with better empirical
justifications and a more detailed study of the model’s properties.
[Livny87] Miron Livny, Setrag Khoshafian, and Haran Boral. Multi-Disk Management
Algorithms. In Proceedings of the 1987 ACM SIGMETRICS Conference on
Measurement and Modeling of Computer Systems, pages 69–77, May 1987.
Compares performance of disk arrays with track-sized and infinite striping units.
Concludes that striping can improve performance for many multi-disk systems.
[LoVerso93] Susan J. LoVerso, Marshall Isman, Andy Nanopoulos, et al. sfs: A Parallel File
System for the CM-5. In Proceedings USENIX Summer Conference, June 1993.
A description of the I/O hardware and the file system of the massively parallel
processor from Thinking Machines. Their RAID-3 disk array has excellent
performance for large file accesses.
[Malhotra93] Manish Malhotra and Kishor S. Trivedi. Reliability Analysis of Redundant Arrays
of Inexpensive Disks. Journal of Parallel and Distributed Computing, 17:146–151,
Uses Markov models to derive exact, closed-form reliability equations for redundant
disk arrays. Analysis accounts for failure prediction and sparing.
[Menon91] Jai Menon, Dick Mattson, and Spencer Ng. Distributed Sparing for Improved
Performance of Disk Arrays. Technical Report RJ 7943, IBM, January 1991.
Explores the use of an on-line spare disk in a redundant disk array analytically. It
examines multiple configurations, but fundamentally it distributes the spare’s space
Chen, Lee, Gibson, Katz, Patterson 63
over the whole array so that every disk is N/(N+2) data, 1/(N+2) parity, and 1/(N+2)
spare. This gives an extra 1/(N+2) performance, but, more significantly, it distributes
the recovery-write load (the reconstructed data) over all disks to shorten recovery
time. The benefits, not surprisingly, are largest for small arrays.
[Menon93a] Jai Menon and Jim Cortney. The Architecture of a Fault-Tolerant Cached RAID
Controller. In Proceedings of the 20th International Symposium on Computer
Architecture, pages 76–86, May 1993.
Describes the architecture of Hagar and several algorithms for asynchronous writes
that reduce susceptibility to data loss,
[Menon93b] Jai Menon, James Roche, and Jim Kasson. Floating Parity and Data Disk Arrays.
Journal of Parallel and Distributed Computing, 17:129–139, 1993.
Introduces floating data and floating parity as an optimization for RAID level 5 disk
arrays. Discusses performance and capacity overheads of methods.
[Merchant92] A. Merchant and P. Yu. Design and Modeling of Clustered RAID. In Proceedings
of the International Symposium on Fault Tolerant Computing, pages 140–149, 1992.
Presents an implementation of parity declustering, which the authors call “clustered
RAID”, based on random permutations. Its advantage is that it is able to derive a data
mapping for any size disk array with any size parity stripe, and the corresponding
disadvantage is that the computational requirements of the mapping algorithm are
high compared to the block-design based approaches. Analyzes response time and
reconstruction time using this technique via an analytic model, and finds substantial
benefits in both.
[Mon91] RAID: A Technology Poised for Explosive Growth. Technical Report DJIA: 2902,
Montgomery Securities, December 1991.
Industry projections of market growth for RAID systems from 1990 to 1995.
[Muntz90] Richard R. Muntz and John C. S. Lui. Performance Analysis of Disk Arrays under
Failure. In Proceedings of the 16th Conference on Very Large Data Bases, 1990.
Proposes and evaluates the “clustered RAID” technique for improving the failurerecovery
performance in redundant disk arrays. It leaves open the problem of
implementation: no technique for efficiently mapping data units to physical disks is
presented. Analyzes via an analytical model the technique and two potential
“optimizations” to the reconstruction algorithm, and finds significant benefits to all
Chen, Lee, Gibson, Katz, Patterson 64
[Nelson88] R. Nelson and A.N. Tantawi. Approximate Analysis of Fork/Join Synchronization
in Parallel Queues. IEEE Transactions on Computers, 37(6):739–743, June 1988.
Approximates response time in fork-join queueing systems with k >= 2 servers
where each logical request always forks into k requests.
[Ng92] Spencer Ng and Dick Mattson. Maintaining Good Performance in Disk Arrays
During Failure via Uniform Parity Group Distribution. In Proceedings of the First
International Symposium on High Performance Distributed Computing, pages 260–
Uses balanced, incomplete block designs to distribute the extra load from a failed
disk equally among other disks in the array.
[Ng94] Spencer Ng. Crossbar Disk Array for Improved Reliability and Performance. In
Proceedings of the 1994 International Symposium on Computer Architecture, April
Introduces schemes to protect against multiple failures of disk support hardware
such as disk controllers and strings.
[Orji93] Cyril U. Orji and Jon A. Solworth. Doubly Distorted Mirrors. In Proceedings of the
ACM SIGMOD International Conference on Management of Data, 1993.
Describes a technique called distorted mirrors that partitions each of two mirrored
disks into two halves, one of which lays out the data in a standard fashion, one of
which “distorts” the data layout. This accelerates writes to the distorted copy while
preserving the ability to sequentially read large files.
[Patterson88] David A. Patterson, Garth Gibson, and Randy H. Katz. A Case for Redundant
Arrays of Inexpensive Disks (RAID). In International Conference on Management
of Data (SIGMOD), pages 109–116, June 1988.
The first published Berkeley paper on RAIDs, it gives all the RAID nomenclature.
[Patterson93] R. Hugo Patterson, Garth A. Gibson, and M. Satyanarayanan. A Status Report on
Research in Transparent Informed Prefetching. ACM Operating Systems Review,
27(2):21–34, April 1993.
Expands on using application hints for file prefetching in [Gibson92]. Hints should
disclose access patterns, not advise caching/prefetching actions. Greatest potential
from converting serial accesses into concurrent accesses on a disk array. Presents
preliminary results of user-level prefetching tests.
[Patterson94] David A. Patterson and John L. Hennessy. Computer Organization and Design: The
Hardware/Software Interface. Morgan Kaufmann Publishers, 1994.
A popular undergraduate book in computer architecture, the discussion on
Chen, Lee, Gibson, Katz, Patterson 65
technology trends are most relevant to readers of this paper.
[Peterson72] W. Wesley Peterson and E. J. Weldon. Error-Correcting Codes, Second Edition.
MIT Press, 1972.
A general textbook on the mathematics of error-correcting codes.
[Rosenblum91] Mendel Rosenblum and John K. Ousterhout. The Design and Implementation of a
Log-Structured File System. In Proceedings of the 13th ACM Symposium on
Operating Systems Principles, October 1991.
Describes a Log-Structured File System that makes all writes to disk sequential.
Discusses efficient ways to clean the disk to prevent excessive fragmentation.
[Salem86] Kenneth Salem and Hector Garcia-Molina. Disk Striping. In Proceedings of the
Second International Conference on Data Engineering, pages 336–342, 1986.
Early paper discussing disk striping.
[Scheuermann91] Peter Scheuermann, Gerhard Weikum, and Peter Zabback. Automatic Tuning of
Data Placement and Load Balancing in Disk Arrays. Database Systems for Next-
Generation Applications: Principles and Practice, 1991. DBS-92-91.
Describes heuristics for allocating files to disks to minimize disk skew.
[Schulze89] Martin Schulze, Garth Gibson, Randy Katz, and David Patterson. How Reliable is a
RAID? In Procedures of the IEEE Computer Society International Conference
(COMPCON), March 1989. Spring COMPCON 89.
Gives a reliability calculation for the electronics as well as the disks for RAIDs.
[Seltzer90] Margo I. Seltzer, Peter M. Chen, and John K. Ousterhout. Disk Scheduling
Revisited. In Proceedings of the Winter 1990 USENIX Technical Conference, pages
313–324, January 1990.
Re-examines the problem of how to efficiently schedule a large number of disk
accesses when accounting for both seek and rotational positioning delays.
[Stodolsky93] Daniel Stodolsky and Garth A. Gibson. Parity Logging: Overcoming the Small
Write Problem in Redundant Disk Arrays. In Proceedings of the 1993 International
Symposium on Computer Architecture, May 1993.
Increases throughput for workloads emphasizing small, random write accesses in a
redundant disk array by logging changes to the parity in a segmented log for efficient
application later. Log segmentation allows log operations that are large enough to be
efficient yet small enough to allow in-memory application of a log segment.
[Tait91] C. D. Tait and D. Duchamp. Detection and Exploitation of File Working Sets. In
Proceedings of the International Conference on Distributed Computing Systems,
Chen, Lee, Gibson, Katz, Patterson 66
pages 2–9, May 1991.
Dynamically builds and maintains program and data access trees to predict future
file accesses. The current pattern is matched with previous trees to prefetch data and
manage the local cache in a distributed file system. Trace-driven simulation shows
reduced cache miss rates over a simple LRU algorithm.
[Weikum92] Gerhard Weikum and Peter Zabback. Tuning of Striping Units in Disk-Array-Based
File Systems. In Proceedings of the 2nd International Workshop on Research Issues
on Data Engineering: Transaction and Query Processing, pages 80–87, 1992.
Proposes file-specific striping units instead of a single, global one for all files.
[Wilmot89] Richard B. Wilmot. File Usage Patterns from SMF Data: Highly Skewed Usage. In
20th International Conference on Management and Performance Evaluation of
Computer Systems, pages 668–677, 1989. CMG 1989.
Reports on how files are accessed on four large data centers and finds that a small
number of files account for most of all disk I/O.
RAID data recovery, Mac data recovery, Unix data recovery, Linux data recovery, Oracle data recovery, CD data recovery, Zip data recovery, DVD data recovery , Flash data recovery, Laptop data recovery, PDA data recovery, Ipaq data recovery, Maxtor HDD, Hitachi HDD, Fujitsi HDD, Seagate HDD,
Hewlett-Packard HDD, HP HDD, IBM HDD, MP3 data recovery, DVD data recovery, CD-RW data recovery, DAT data recovery, Smartmedia data recovery, Network data recovery, Lost data recovery, Back-up expert data recovery, Tape data recovery, NTFS data recovery, FAT 16 data recovery, FAT 32 data recovery, Novell data recovery, Recovery tool data recovery, Compact flash data recovery, Hard drive data recovery, IDE data recovery, SCSI data recovery, Deskstar data recovery, Maxtor data recovery, Fujitsu HDD data recovery, Samsung data recovery, IBM data recovery, Seagate data recovery, Hitachi data recovery, Western Digital data recovery, Quantum data recovery, Microdrives data recovery, Easy Recovery, Recover deleted data , Data Recovery, Data Recovery Software, Undelete data, Recover, Recovery, Restore data, Unerase deleted data, unformat, Deleted, Data Destorer, fat recovery, Data, Recovery Software, File recovery, Drive Recovery, Recovery Disk , Easy data recovery, Partition recovery, Data Recovery Program, File Recovery, Disaster Recovery, Undelete File, Hard Disk Rrecovery, Win95 Data Recovery, Win98 Data Recovery, WinME data recovery, WinNT 4.x data recovery, WinXP data recovery, Windows2000 data recovery, System Utilities data recovery, File data recovery, Disk Management recovery, BitMart 2000 data recovery, Hard Drive Data Recovery, CompactFlash I, CompactFlash II, CF Compact Flash Type I Card,CF Compact Flash Type II Card, MD Micro Drive Card, XD Picture Card, SM Smart Media Card, MMC I Multi Media Type I Card, MMC II Multi Media Type II Card, RS-MMC Reduced Size Multi Media Card, SD Secure Digital Card, Mini SD Mini Secure Digital Card, TFlash T-Flash Card, MS Memory Stick Card, MS DUO Memory Stick Duo Card, MS PRO Memory Stick PRO Card, MS PRO DUO Memory Stick PRO Duo Card, MS Memory Stick Card MagicGate, MS DUO Memory Stick Duo Card MagicGate, MS PRO Memory Stick PRO Card MagicGate, MS PRO DUO Memory Stick PRO Duo Card MagicGate, MicroDrive Card and TFlash Memory Cards, Digital Camera Memory Card, RS-MMC, ATAPI Drive, JVC JY-HD10U, Secured Data Deletion, IT Security Firewall & Antiviruses, PocketPC Recocery, System File Recovery , RAID